VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX User Manual A50-45733-00004
VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. Caution 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. + To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside.
VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX Foreword Table of contents Dear Customer, Welcome to the team of VIRTUBE users, and thank you very much for expressing your confidence in us by purchasing this device.
VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX 1. INTRODUCTION 1.1.1 Online Registration Congratulations! With the VIRTUBE, you have the newest generation of guitar amps. It offers an extremely broad range of options and possibilities, the only limit being your own creativity. The VIRTUBE is an allrounder with so many features that you hardly need any other equipment. The demands placed on a guitar amp are nowadays very broad. A guitarist should offer a wide array of sounds.
VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX 2. Control elements Fig. 2.1: VIRTUBE control elements (front panel) 2.1 Front panel 2.1.3 DIGITAL FX {1} The INPUT socket is the 1/4" connector for your guitar. Please use a standard 1/4" TS connector. [17] The DIGITAL FX LED lights up when the effects processor is active. [18] Use the FX PRESET control to select one of 16 effects. 2.1.1 CLEAN CHANNEL Preset 1-4 5-8 9 - 12 13 - 16 {2} The CLEAN CHANNEL LED lights up when the CLEAN channel is active.
VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX Fig. 2.2: VIRTUBE control elements (rear panel) ++ Please note: Merely switching the unit off does not mean that it is fully disconnected from the mains. To disconnect the unit from the mains, pull out the mains connector. Before installation, please make sure that the mains connector has not been damaged. If you do not use the unit for an extended period of time, please disconnect it at the mains. 3.
VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX 3.2 Recording set-up with effects device 3.3 Live set-up with external speaker box GI100 Fig. 3.2: Recording set-up with the VT100FX If you want to use your VIRTUBE in a home-recording or studio environment, please wire it as shown in fig. 3.2. Of course, you can still use a CD player or drum computer in this set-up. This is not shown here to provide for a better overview.
VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX 3.4 Wiring the VT100FXH The VT100FXH has two SPEAKER OUT outputs for connection of one or two external speaker cabinets. To achieve maximum power output on the VT100FXH, both speaker outputs should be connected to speaker cabinets with a minimum impedance of 4 Ω. Connecting headphones to the PHONES jack will automatically mute the speaker outputs. Fig. 4.1: 1/4" TS connector Fig. 4.2: 1/4" TRS connector Fig. 3.4: VT100FXH with two speaker boxes Fig. 4.
VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX 5. Specifications VT100FXH AUDIO INPUTS INPUT Input impedance FX RETURN Input impedance CD IN Input impedance AUDIO OUTPUTS FX SEND Output impedance LINE OUT/PHONES Output level LOUDSPEAKER OUTPUTS Type Min.
VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX 6. Warranty § 1 Other warranty rights and national law == improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals. 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract.
VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX Warranty 11
7. FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX Responsible party name: BEHRINGER USA, Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.