User Manual XENYX X1622USB/X1832USB/X2222USB/ X2442USB Premium 16/18/22/24-Input 2/2, 3/2, 4/2-Bus Mixer with XENYX Mic Preamps, British EQs, 24-Bit Multi-FX Processor and USB/Audio Interface behringer.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 General mixing console functions...
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with ¼" TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual [2] Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by MUSIC Group. [3] Shipments without freight prepaid will not be accepted. § 4 Warranty Exclusions [1] This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual 1. Introduction XENYX Mic Preamp The microphone channels feature high-end XENYX Mic Preamps that compare well with costly outboard preamps in terms of sound quality and dynamics and boast the following features: !! CAUTION! ◊ We should like to draw your attention to the fact that extreme volumes may damage your hearing and/or your headphones or loudspeakers.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual • Mix: All other mixing console functions fall under this vital category. Creating a mix means primarily adjusting the volume levels of individual instruments and voices to one another as well as giving them the appropriate weight within the overall frequency spectrum. Likewise, you’ll have to sensibly spread individual voices across the stereo image of a signal.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual MIC 2.1.2 Equalizer Each mono input channel offers a balanced microphone input via the XLR connector and also features switchable +48 V phantom power supply for condenser microphones. The XENYX preamps provide undistorted and noise-free gain as is typically known only from costly outboard preamps. All mono input channels have a 3-band equalizer with semi-parametric mid bands. All bands provide boost or cut of up to15 dB.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual Monitor and effects busses (AUX sends) source their signals via a control from one or more channels and sum these signals to a so-called bus. This bus signal is sent to an aux send connector (for monitoring applications: MON OUT) and then routed, for example, to an active monitor speaker or external effects device. In the latter case, the effects return can then be brought back into the console via the aux return connectors.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual 2.2 Stereo channels 2.2.3 Aux sends stereo channels In principle, the aux sends of the stereo channels function the same way as those of the mono channels. As the aux sends are mono, the send from a stereo channel is first summed to mono before it reaches the aux bus. 2.2.1 Channel inputs 2.2.4 Routing switch, solo and channel fader Fig. 2.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual AUX SEND 3 (FX) STEREO AUX RETURN The FX control determines the signal level for effects processing, i.e. regulates the level to an external (or the internal) effects device. The STEREO AUX RETURN 1 jacks generally serve as the return for the effects mix (created using the post-fader aux sends) by connecting the output of an external effects device. If only the left jack is connected, the AUX RETURN is automatically switched to mono.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual MUTE Press the MUTE switch to mute the monitor send. The following table shows which jacks on the console can be used for this purpose. External effects device receives signal from... External effects device routes signal back to...
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual STEREO AUX RETURN 4 (X2442USB only) This control behaves the same way as the other stereo aux returns. Additionally, it provides for a simple monitor path using the switch PHONES/CTRL ROOM ONLY. PHONES/CTRL ROOM ONLY Use this switch to route the signal appearing at the AUX RETURN 4 jacks to the control room and headphones outputs. 2.3.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual 2.3.9 Lamp socket (X2442USB only) Use this BNC socket to connect a gooseneck lamp (12 V DC, max. 0.5 A). 2.3.10 Level meter and monitoring ◊ While phantom power is switched on, do not connect or disconnect microphones on the mixer (or the stagebox/wallbox). Connect any micro-phones before switching on phantom power. Additionally, monitor/PA speakers should be muted before you activate the phantom power supply. After switching on, wait approx.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual MAIN SOLO The MAIN SOLO LED lights up as soon as a channel or aux send solo switch is pressed. The MODE switch must be set to “Solo”. 3. Graphic 9-Band Equalizer (X1832USB only) PFL (LEVEL SET) The PFL (LEVEL SET) LED indicates that the peak meter is set to PFL mode. Fig. 2.17: PHONES jack PHONES jack You can connect headphones to this ¼" stereo jack (X2442USB: 2 phones jacks).
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual 5. Rear Panel Connectors 5.1 Main mix outputs, insert points and control room outputs X1832USB Fig. 4.1: Digital effects module The built-in stereo effects processor has the advantage that it does not need to be wired up. This excludes the danger of humming or level mismatch right from the start and thus considerably facilitates use. These effect presets are classical “mixing effects”.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual 5.3 Inserts 5.6 Voltage supply, phantom power supply and fuse X1622USB Fig. 5.3: Insert points ◊ On the 2442FX the channel insert points are located on the control panel between the line input and the GAIN control. Insert points are very useful to process channel signals with dynamic processors or equalizers.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual 6. Installation Balanced use with XLR connectors 6.1 Rack mounting The packaging of your mixing console contains two 19" rack mounts for installation on the side panels of the console. Before you can attach the rack mounts to the mixing console, you need to remove the screws holding the left and right side panels. Then, use these screws to fasten the two rack mounts, each specifically to one side.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual Balanced ¼" TRS connector ¼" TRS headphones connector strain relief clamp strain relief clamp sleeve sleeve ring ring tip tip sleeve ground/shield sleeve ground/shield ring cold (-ve) ring right signal tip hot (+ve) tip left signal For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. Fig. 6.6: Stereo plug for headphones connection Fig. 6.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual 7. Specifications EQ stereo channels Microphone inputs (XENYX Mic Preamp) Type XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance -134 dB / 135.7 dB A-weighted @ 50 Ω source resistance -131 dB / 133.3 dB A-weighted @ 150 Ω source resistance -129 dB / 130.5 dB A-weighted Frequency response <10 Hz - 150 kHz (-1 dB), <10 Hz - 200 kHz (-3 dB) Gain range +10 to +60 dB Max.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual Main mix system data2 Noise Main mix @ -oo, Channel fader @ -oo Main mix @ 0 dB, Channel fader @ -oo Main mix @ 0 dB, Channel fader @ 0 dB -101 dB -100 dB (X2442USB) -93 dB -96 dB (X1622USB) -87 dB (X2442USB) -81 dB -83 dB (X1622USB) -80 dB (X2442USB) Power supply Mains voltage 100 to 240 V~, 50/60 Hz Power consumption 50 W (X1622USB) 50 W (X1832USB) 50 W (X2222USB) 50 W (X2442USB) Fuse 100 - 240 V ~: T 1.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION XENXYX X1622USB/X1832USB/ X2222USB/X2442USB Responsible party name: BEHRINGER USA, Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual behringer.
XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual behringer.
Important Safety Instructions behringer.