E1220A/E1520A EUROLIVE User manual A50-71533-00001
EUROLIVE E1220A/E1520A Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. ** !! This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.
EUROLIVE EUROLIVE E1220A/E1520A Processor-Controlled 400-Watt 2-Way PA Loudspeaker/Floor Monitor == Exceptional sound quality, wide frequency bandwidth and extensive dynamic range == Integrated sound processor for ultimate system control and speaker protection E1220A/E1520A == High-power 400-Watt 2-way PA sound reinforcement speaker/floor monitor for live and playback applications == Extremely powerful 12"/15" long-excursion driver provides incredibly deep bass and acoustic power == Proprietary 1'' HF
EUROLIVE E1220A/E1520A Foreword Table of Contents Dear customer, welcome to the community of EUROLIVE users, and thank you very much for expressing your confidence in us by purchasing these PA loudspeakers.
EUROLIVE E1220A/E1520A 1.1.2 Initial operation Be sure that there is enough space around the unit for cooling. To avoid overheating, do not place the E1220A/E1520A on top of power amps or near radiators, etc. 2. Control elements and connections ++ Blown fuses must be replaced by fuses of the same type and rating. Please refer to the “SPECIFICATIONS” for further details. The mains connection is made using the enclosed power cord and a standard IEC receptacle.
EUROLIVE E1220A/E1520A 3. Application examples ++ Turn the LEVEL control fully to the left before you switch on the unit with the POWER switch. Then, raise the volume to a suitable level. 3.1 Using a mixing console A common way to use 2 E1220A/E1520A loudspeakers is with a mixing console. In this case, connect each of the main outputs that are on the mixing console to a E1220A/E1520A loudspeaker. The E1220A/E1520A includes XLR and 1/4" connectors. To avoid interference, use only XLR or 1/4" jack cables.
EUROLIVE E1220A/E1520A 4. Installation 5. Specifications Both audio inputs of the BEHRINGER E1220A/E1520A and the LINK OUTPUT connector are fully balanced. To maximize interference compensation, try to establish balanced connections to other equipment, whenever possible.
EUROLIVE E1220A/E1520A 6. Warranty § 1 Other warranty rights and national law 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law.