User Manual ULTRABASS BX1800 180-Watt Bass Amplifier with Original BUGERA Speaker and VTC-Technology
ULTRABASS BX1800 User Manual Table of Contents Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 Before you get started....................................................... 5 1.1.1 Shipment..................................................
ULTRABASS BX1800 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
ULTRABASS BX1800 User Manual “Support” at behringer.com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product.
ULTRABASS BX1800 User Manual 1. Introduction With the BX1800 you have acquired a state-of-the-art Bass Workstation that sets new standards in bass amp engineering. Right from the start, our goal has been to design a revolutionary amp that stands out from the herd of “ordinary” bass amplifiers. And indeed, the BX1800 gives you plenty of functionality and a broad range of connection and expansion options. In short: you’ll be fascinated to find that the BX1800 is a Workstation with a character.
ULTRABASS BX1800 User Manual 2. Wiring Tips Figures 2.1 and 2.2 show you how to connect your bass to the amplifier. If you want to use an effects unit (for example, the BEHRINGER X V-AMP PRO) to experiment with some out-of-the-ordinary sounds, you can connect your bass directly to the input of the unit. Then, connect a second cable from the effects output to the input on your bass amp. Fig. 2.
ULTRABASS BX1800 User Manual 3. Control Elements (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) Fig. 3.1: Front view (1) Connect your bass to the INPUT jack, using a standard cable with a 1/4" TS connector. (15) Use the balanced D.I. OUT XLR output to feed the audio signal from your ULTRABASS to an external mixing console. The D.I. OUT signal is post-EQ. (2) Press the PAD switch when using active instruments with high output levels.
ULTRABASS BX1800 User Manual 4. Audio Connections 5. Specifications Except for the D.I. OUT output which is on a balanced XLR connector, your BEHRINGER ULTRABASS BX1800 features 1/4" connectors on inputs and output. More detailed information can be found in chapter 5, “Specifications.” ◊ Please keep in mind that all the equipment has to be grounded at all times.
We Hear You
