User Manual C-1 Studio Condenser Microphone V 4.
3 C-1 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with ¼" TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
4 C-1 User Manual 5 C-1 User Manual If necessary, you can bend the microphone out of its vertical position by using the hinge on the microphone stand. ◊ Please make sure to handle the microphone shaft with attention and care to avoid damaging the screw thread. In no situation should you ever apply excessive force. 340° Use a balanced XLR microphone cable with the following pin assignment: pin 1 = shielding; pin 2 = +; pin 3 = -.
6 7 C-1 User Manual 6. Specifications Transducer type condenser, 16 mm Polar pattern cardioid Connection: gold-plated balanced XLR connector Open circuit sensitivity -33 ± 2 dBV (0 dBV = 1 V/Pa) Frequency response 40 Hz - 20 kHz Max. SPL (1% THD @ 1 kHz) 136 dB Nominal impedance 100 Ω Load impedance >1 kΩ Mains Voltage/Fuse Supply voltage +36 - 52 V Supply current 2.5 mA Physical/Weight Dimensions Ø shaft: 54 mm length: 180 mm Weight approx. 0.
We Hear You