Quick Start Guide (Visit behringer.
CMD TOUCH TC64 Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
4 CMD TOUCH TC64 Consignes de sécurité Les points repérés par ce symbole portent une tension électrique suffisante pour constituer un risque d’électrocution. Utilisez uniquement des câbles d’enceintes professionnels de haute qualité avec fiches Jack mono 6,35 mm ou fiches à verrouillages déjà installées. Toute autre installation ou modification doit être effectuée uniquement par un personnel qualifié.
6 CMD TOUCH TC64 Instruções de Segurança Importantes Aviso! Terminais marcados com o símbolo carregam corrente elétrica de magnitude suficiente para constituir um risco de choque elétrico. Use apenas cabos de alto-falantes de alta qualidade com plugues TS de ¼" ou plugues com trava de torção pré-instalados. Todas as outras instalações e modificações devem ser efetuadas por pessoas qualificadas.
8 CMD TOUCH TC64 9 Quick Start Guide CMD TOUCH TC64 Hook-up (EN) Step 1: Hook-Up (ES) Paso 1: Conexión (FR) Etape 1 : Connexions (DE) Schritt 1: Verkabelung (PT) Passo 1: Conexões USB A Laptop USB B
10 CMD TOUCH TC64 11 Quick Start Guide CMD TOUCH TC64 Controls (EN) Step 2: Controls Ces deux touches peuvent être utilisées pour passer du mode de fonctionnement normal du CMD TOUCH TC64 au mode d'émulation du Novation Launchpad S. Vous trouverez de plus amples détails dans les pages suivantes. These two buttons can also be used to change the operation between CMD TOUCH TC64 mode and Novation Launchpad S emulation mode. See the next page for details.
12 CMD TOUCH TC64 13 Quick Start Guide CMD TOUCH TC64 Getting started (EN) Step 3: Getting started OVERVIEW This ‘Getting Started Guide’ will help you set up your CMD TOUCH TC64 and briefly introduce its capabilities. The CMD TOUCH TC64 is a pad controller that allows clip launching as well as triggering other MIDI events. Each pad transmits a predefined MIDI note message (see MIDI Map on page 15.) SOFTWARE SET-UP CMD TOUCH TC64 is a Class Compliant MIDI device, so no driver installation is required.
14 CMD TOUCH TC64 CMD TOUCH TC64 MIDI Map 15 Quick Start Guide
16 CMD TOUCH TC64 Quick Start Guide Other important information Specifications Computer Bus Connectivity USB 17 USB 2.0, type B Important information Informations importantes Outras Informações Importantes Power Supply Voltage Power consumption (maximum) Power source 5V 500 mW (normal brightness mode) 750 mW (bright mode) USB powered Dimensions / Weight Dimensions Weight 25.3 x 240 x 240 mm (1.0 x 9.45 x 9.45") 0.77 kg (1.70 lbs) 1. Register online.
18 CMD TOUCH TC64 Quick Start Guide FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION CMD TOUCH TC64 Responsible Party Name: MUSIC Group Services NV Inc. Address: 5270 Procyon Street Las Vegas, NV 89118 USA Phone Number: +1 702 800 8290 CMD TOUCH TC64 complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
We Hear You