Firmware Update Instructions 1.0.6

ManualsBrandsBehringer ManualsAnalog SynthesizersAuthentic Analog Synthesizer with 3 VCOs, Ladder Filter, LFO and Eurorack Format

page

musictri.be

behringer.com

Model D Firmware Update Instructions

Version 1.0.6 - (11 May 2018)

Note: The model D updater V1.0.6 supports Windows 7 and onwards.

1. Download the Model D Firmware Updater V1.0.6 here: http://www.musictri.be/Categories/

Behringer/Keyboards/Synthesizers-and-Samplers/MODEL-D/p/P0CQJ/downloads

2. Connect USB cable from your Model D to computer by using one of its on-board USB ports.

Avoid using any USB hubs.

3. Connect the power supply and switch on the power for the Model D. You may notice that

Windows highlights that a “New Device” has been connected and will install this device to your

operating system - Please wait for this process to complete before proceeding. Once installed

Windows will confirm this.

Summary of content (4 pages)

PAGE 1
Model D Firmware Update Instructions Version 1.0.6 - (11 May 2018) Note: The model D updater V1.0.6 supports Windows 7 and onwards. 1. Download the Model D Firmware Updater V1.0.6 here: http://www.musictri.be/Categories/ Behringer/Keyboards/Synthesizers-and-Samplers/MODEL-D/p/P0CQJ/downloads 2. Connect USB cable from your Model D to computer by using one of its on-board USB ports. Avoid using any USB hubs. 3. Connect the power supply and switch on the power for the Model D.
PAGE 2
4. Open up the Model D Firmware Updater previously downloaded. It should connect to the Model D and display the device current firmware. *If you see “Model D not detected” or if “Device Firmware Version” is blank you may need to update some system files to continue. Please install the Windows “.NET Compact Framework 2.0 Redistributable” (https://www.microsoft.com/en-gb/download/confirmation.aspx?id=22808). If this doesn’t solve the issue please contact our CARE team. musictri.be page 2 of 4 behringer.
PAGE 3
5. To begin the firmware update, click “START UPDATE” *This may take some time to complete so please be patient whilst the update completes.* musictri.be page 3 of 4 behringer.
PAGE 4
6. When the Updater tool completes you will see that the update bar will be a “solid” green and a notification “Update Successful. Close Model D Updater and restart the device!” as the instruction mentions please restart the Model D. 7. To check that the update has completed, close the Model D Firmware Updater and re-open it. You will now see that the update completed and displays “Device Firmware Version: 1.0.6” © MUSIC Tribe Global Brands Ltd. All rights reserved.