User manual

ULTRADRIVE PRO DCX2496

4. MENU STRUCTURE AND EDITING

2. L(1) M(2) H(3) L(4) M(5) H(6)

Fig. 4.5: Output configuration LMHLMH

Link: L(1) > L(4) / M(2) > M(5) / H(3) > H(6)

3. L(1) L(2) M(3) M(4) H(5) H(6)

Fig. 4.6: Output configuration LLMMHH

Link: L(1) > L(2) / M(3) > M(4) / H(5) > H(6)

4. L(1) H(2) L(3) H (4) L(5) H(6)

Fig. 4.7: Output configuration LHLHLH

Link: L(1) > L(3) > L(5) / H(2) > H(4) > H(6)

Fig. 4.8: Setup ß In/Out

When OUT STEREO LINK is enabled, the unit warns you that

all settings for the linked outputs will be lost, because they will be

overwritten with the values of the output to be selected.

Any further changes to the parameters of a specific output will

be transferred directly to the linked output. However, any edits

made to a LONG DELAY value (see chapters 4.2.2 and 4.5.5) will

not be transferred to the other output. This parameter can be

adjusted specifically for each output. SHORT DELAY settings (see

chapters 4.2.2 and 4.5.5) will be transferred as long as OUT

STEREO LINK is on.

+ In the MONO configuration, the OUT STEREO LINK

function cannot be activated.

Tab. 4.1: Survey of all OUT LINK configurations