Manualshelf

User manual

ManualsBrandsBehringer ManualsCrossoversDigital 24-bit / 96 kHz Loudspeaker Management System
21222324252627282930
25
ULTRADRIVE PRO DCX2496
6.4 Stereo operation plus mono subwoofer
Fig. 6.4: Stereo operation plus mono subwoofer
A full-range stereo signal is sent to two active speaker cabinets for stereo reproduction. There is no need for a dedicated frequency
separation because the crossover and amplifier in the active speaker are perfectly adapted to each other. However, to achieve more
power in the bass, low frequencies are cut off in the active cabinets and routed to a subwoofer. The power amp is set to mono-bridged
mode and the SUM signal derived from In A+B is sent to the subwoofer. Outputs 4 to 6 can be used as mono or stereo delay lines.
6. APPLICATIONS