Manual

22 ULTRADRIVE PRO DCX2496/ULTRADRIVE DCX2496LE User Manual 23 ULTRADRIVE PRO DCX2496/ULTRADRIVE DCX2496LE User Manual
6.5 Stereo operation plus 2 subwoofers
Output 5 + 6 usable as additional mono delay line outputs.
XENYX X2222USB Mixing console
Left
In A
Out 1 2 3 4 (5 and 6 not used)
EUROPOWER EP2000
Stereo power amplier
EUROLIVE
B1220 PRO
Left passive
loudspeaker
Right passive
loudspeaker
In B
Stereo output
Right
High (2)
High (4)
EUROLIVE B1800X PRO
Left active subwoofer Right passive subwoofer
Low (3)
Low (1)
Fig. 6.5: Stereo operation plus 2 woofer cabinets
Only two frequency ranges (Low and High) are used on each stereo side. Thetwo passive speaker cabinets for the higher frequencies are limited towards the bass end
and are  ne-tuned in their sound with the DCX’s internal equalizer. The stereo bass signal is  rst sent to the active woofer, which also provides the passive woofer
cabinet with su cient power for the right-hand low-frequency channel. The unused outputs 5 and 6 can be used as mono delay lines.
6.6 Stereo bi-amp operation plus subwoofer and additional monitor
XENYX X2222USB Mixing console
Monitor output
Right
Left
Stereo sub master
In A
Outputs: 1 2 3 4 5 6
In B In C
High (2)
High (4)
Left Right
Mid (3)
Mid (1)
Active mono subwoofer
EUROLIVE F1220A
Full Range mono monitor
In C signal
Low (5) SUM (A + B) signal
Fig. 6.6: Stereo 2-way operation plus subwoofer and additional monitor
Inputs A+B carry the stereo signal optimized for the two 2-way speakers. Thewoofer signal is derived from the sum signal of A+B, limited in its frequency range and
routed to the active sub-woofer. A separate signal from the mixing console (aux/subgroup) for a separate speaker can be processed via In C. In our example, this is a
full-range stage monitor with its own ampli er able to play back a dedicated monitor mix for the singer, drummer or other performers.
This scenario does not apply to the DCX2496LE.