Manual

24 ULTRADRIVE PRO DCX2496/ULTRADRIVE DCX2496LE User Manual 25 ULTRADRIVE PRO DCX2496/ULTRADRIVE DCX2496LE User Manual
6.7 Mono 6-zone distribution mode
XENYX X2222USB Mixing console
Mono master
output
In A
Outputs: 1
(Sub) (Mid)(Low
Mid)
(Low)
(1)
Left
EUROLIVE B1520 PRO
Right Left Right Left Right
(2) (3) (4) (5) (6)
23456
Identical full range mono output signals
(High mid)
(High)
EUROPOWER EP2000
Stereo power amplier
Fig. 6.7: Mono 6-way “Zoning” (signal distribution mode)
In this special-purpose application, the ULTRADRIVE PRO is not used as a frequency crossover but rather as a signal distributor, for dedicated EQing plus individual
delays and separate volume settings for each output. The monophonic mix signal is split up and sent to six equal outputs. It can be used for a variety of applications
requiring the transmission of music or speech over large distances or to several rooms or rooms consisting of several compartments. Examples are large discotheques,
multi-room clubs/pubs/bars, shopping malls, restaurants, hotels, lobbies, trade show and conference halls, railway stations, churches/cathedrals and even at home
where you can use the DXC2496 to play back music in every room.
6.8 Stereo 3-zone delay line
XENYX X2222USB Mixing console
EUROLIVE B1520 PRO
All loudspeakers: full range
Left (1) Right (2)
Left (3) Right (4)
Left (5) Right (6)
(Low)
(High)
EUROPOWER EP2000
Stereo power amplier
Delay line 1
(Low)
(High)
Delay line 2
(Low)
(High)
Delay line 3
Right
In A
Outputs: 1 2 3 4 5 6
In A
Stereo sub master
Left
Right
Main
amplication
Stereo master
Left
Fig. 6.8: Triple stereo delay line
In this application, the ULTRADRIVE PRO is not used as a crossover network. Instead, it produces stereo delay lines, i.e. stereo speaker cabinets delayed in time with
regard to each other. All pairs of cabinets are supplied with the same full-range stereo input signal A+B. Then, these pairs can be placed at regular distances away
from the stage, as is often the case at big open-air concerts. Thefarther away the original signal (usually the music played on stage) is, themore audible the delay
between speaker signal (close to the listener) and original signal (far away) becomes. The DCX2496 allows you to make up for the resulting echoes by adding speci c
delay times to the speaker signals. This allows the audience to feel as if they were “part of it” even though they may be far away from the stage—and this without any
annoying echoes.