Specification Sheet

2 ULTRACURVE PRO DEQ2496 Technical Specifications
ULTRACURVE PRO DEQ2496
Ultra-High Precision 24-Bit/96 kHz Equalizer, Analyzer,
Feedback Destroyer and Mastering Processor
Ultra-high resolution 24-bit/96 kHz mastering processor featuring 32/40-bit oating-point DSP technology
Audiophile 24-bit/96 kHz A/D- and D/A converters oering 113 dB dynamic range
4 concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus 3 Dynamic EQs per stereo channel)
Ultra-high resolution 61-band real-time FFT analyzer with additional auto EQ function for room and loudspeaker equalization
Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs
State-of-the-art compressor/expander with peak limiter per stereo channel, additional stereo imager and stereo delay for delay line applications
Multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA/Mic input)
64 user memories for complete setups and/or individual module congurations
Separate mic/line input with phantom power for RTA and Auto-EQ applications
Balanced inputs and servo-balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical)
Professional Wordclock input and MIDI connections for full remote control, preset dumps and system updates
Open architecture allowing future software updates via MIDI
"Planet Earth" switching power supply for maximum exibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Specications
Analog Inputs
Type electronically balanced
Connector XLR
Impedance 22 kΩ at 1 kHz
Max. input level +12 or +22 dBu, switchable
CMRR 40 dB typ.
Analog Outputs (Main)
Type servo-balanced
Connector XLR
Impedance 100 Ω at 1 kHz
Max. output level +12 or +22 dBu, switchable
Analog Outputs (Aux)
Type servo-balanced
Connector ¼" stereo jack
Impedance 100 Ω at 1 kHz
Max. output level +12 dBu
System Specications
Frequency range 10 Hz to 35 kHz (-1 dB)
@ 96 kHz sampling rate
Signal-to-noise ratio > 113 dB main input/output
> 107 dB aux output
THD 0.007 % typ. @ +4 dBu, 1 kHz, unity
gain
Crosstalk < -92 dB/-95 dB
Bypass
Type Relay, hard-bypass in case of power
failure
Measurement Microphone Input
Type electronically balanced
Input impedance 2 kΩ
Max. input level (LINE) variable from -14 dBu to +22 dBu
Max. input level (MIC) variable from -42 dBV/Pa to -6 dBV/Pa
Phantom power +15 V, switchable