Protocol Manual

music-group.com behringer.com
2
PERMANENT MIDI ASSIGNMENTS OVERVIEW (REMOTE OFF)
MIDI RX Midi Ch Controller Value Comment
Scenes
1 Program Change 1-100
Snippet 2 Program Change 1-100
Cue 3-6 Program Change 0-127 Ch3 -> Cue 1-127, Ch4 -> Cue 128-255, etc.
Mute Groups 2 CC80-85 on (127) / o (0), toggle latching
Faders 1 CC0-79 0-127 Value 95 = 0dB
Mute 2 CC0-79 on (127) / o (0), toggle latching
Pan 3 CC0-79 1-127 Value 64 = Pan Mid
MIDI TX Midi Ch Controller Value Comment
Mute Groups
2 CC80-85 on (127) / o (0), toggle latching
Faders 1 CC0-79 0-127 Value 95 = 0dB
Mute 2 CC0-79 on (127) / o (0), toggle latching
Pan 3 CC0-79 1-127 Value 64 = Pan Mid
MIDI RX > ASSIGN
Whenever assignable controls are set up for transmitting MIDI commands, reception of that same
command (status or continuous) will be re ected on the respective assignable control element
(buttonlight, encoder LED collar).
MIDITX > ASSIGN
We restricted the user assignable MIDI commands to some generic elements, in order to keep things
simpleenough:
• Encoders 1-4 > can be assigned to sending control changes, program changes or notes
– parameters are currently ‘Channel’ and ‘Value’
– for CC and Note commands ‘Value’ = controller number/note number, and the encoder
rotation determines the controller value/note-on velocity
– for Program Changes only the channel is speci ed, and the encoder rotation determines the
programnumber
• Buttons 5-12 > can be operated in two modes, ‘MIDI Push’ (non-latching) for momentary
commands, or ‘MIDI Toggle’ (latching) for static commands