Quick Start Guide
Firewire / USB Card
1. Press the SETUP button near the screen, and use the PAGE SELECT buttons to select the “card” tab.
2. Choose either USB or Firewire and the desired conguration.
3. Press the ROUTING button and use page over to the “card out” tab to verify what signals are feeding your DAW
4. By default, the card will output the direct out signals of the 32 on-board XLR inputs, (ex. “Local 1-8”).
When using the S16 you will need to select the AES50 options, (ex. “AES50 A1-8”).
5. If using a PC, go to www.behringer.com/x32 to download and install the latest drivers.
6. Power down your computer, connect the X32 via USB or Firewire, and power back on the computer.
Note: The X32 will work with Core Audio on MAC and WDM / ASIO Drivers on PC, making
it compatible with virtually all major DAWs. It is also compatable with live sound
plugin hosts such as Waves MultiRack.