Quick Start Guide

Firmware Updates / USB Stick Recording
To Update Firmware:
1. Go to behringer.com/X32 and click the “Downloads”
tab. Download the latest rmware to your computer
and “unzip” the le. Copy the rmware le onto the
root directory of a FAT formatted USB stick.
2. Insert the USB stick into the USB Recorder slot and
switch on the console. During boot, the X32 will run a
fully automatic rmware update.
3. Once complete, the console will boot to the normal
operating screen.
To Record to the USB Stick:
1. Insert the USB Stick into the USB RECORDER and
press the “view” button.
2. Press the 5th rotary encoder, under the screen,
to begin recording.
3. Use the rst encoder to stop. WAIT for the ACCESS
light to turn o before removing the stick.
Notes:
4. Stick must be formatted for FAT le system.
5. Maximum record time is approximately 3 hours for
each le, with a le size limit of 2GB.
6. Recording is at 16-bit, 44.1kHz or 48kHz depending
on console sample rate.