Version 1.
EUROLIVE PERFORMER SERIES IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this device near water. 6) Clean only with a dry cloth. 7) Be sure to mount your speakers on a solid, stable and level base or stand. Vibrating floors do not provide reliable support for speaker enclosures or stacks.
EUROLIVE PERFORMER SERIES FOREWORD Dear customer, welcome to the team of EUROLIVE users, and thank you very much for expressing your confidence in us by purchasing these PA loudspeakers.
EUROLIVE PERFORMER SERIES 1. INTRODUCTION By purchasing BEHRINGER EUROLIVE PERFORMER speakers, you have obtained a first-class PA loudspeaker system. Now, you own (at least) one component of an expandable system that will reproduce the sound of your musical material unadulterated and perfectly balanced. Thanks to its numerous features, the EUROLIVE PERFORMER SERIES is the ideal PA loudspeaker system: it is equally wellsuited both for small gigs and large stages.
EUROLIVE PERFORMER SERIES 2. OPTIMAL OPERATION We have developed the EUROLIVE PERFORMER SERIES for use in a wide range of possible applications. Of course, the sound of your loudspeakers depends on the acoustic characteristics of the room/space in which they are being used. The following chapters of this manual will give you information about getting the most out of your EUROLIVE speakers. 2.
EUROLIVE PERFORMER SERIES 4. PIN ASSIGNMENT 6XEZRRIHU ( ; PINS 1-/1+ PINS 2-/2+ 3$66,9( INPUT: Full-range input OUTPUT: high-pass output Signal loop %, $03,1* Signal loop Subwoofer input Table 4.1: Pin assignment Always try to find the optimal signal level. Try to avoid overdriving your amp. s Keep in mind the physical limitations of your PA system. s Use a limiter to restrict the output signal level. Place the limiter between the mixing console and the power amp.
EUROLIVE PERFORMER SERIES 6.2 Stereo operation with a subwoofer Using a crossover, the main stereo output signal of a mixing console is split into a stereo signal and a mono signal, whereby the mono signal covers the lower frequency range and the stereo signal carries the rest of the frequencies. Then, the stereo signal is connected to a stereo power amplifier. An E1520 is connected to each of the amps outputs.
EUROLIVE PERFORMER SERIES 7.4 Treble signal too low 7. TROUBLESHOOTING 7.1 No signal when loudspeaker is connected s Check the EQ settings on your mixing console or on an external EQ, if applicable. s Make sure that the tweeters on your loudspeakers are positioned at the same height as the ears of the people in the audience. If not, please modify the speaker position. s The internal tweeter fuse may have opened. In this case, please contact a BEHRINGER service branch office near you.
EUROLIVE PERFORMER SERIES 8. SPECIFICATIONS 6<67(0 '$7$ ( ( ( ; 2-way full-range speaker (12" + 1") 2-way full-range speaker (15" + 1") Subwoofer (18") Frequency response 60 Hz - 20 kHz (-10 dB) 55 Hz - 20 kHz (-10 dB) 45 Hz - 300 Hz (-10 dB) Power rating1 (RMS) 200 W 200 W 400 W Power rating (Peak Program) 400 W 400 W 800 W 8Ω 8Ω 8Ω 93 dB (Full Space) 94 dB (Full Space) 99 dB (Half Space) 90° x 40° 90° x 40° - 3 kHz 2.
EUROLIVE PERFORMER SERIES 9. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyers statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law. 2.