User Manual EUROLIVE F1320 Active 300-Watt 2-Way Monitor Speaker System with 12" Woofer, 1" Compression Driver and Feedback Filter
EUROLIVE F1320D User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Before you Get Started............................................... 5 1.1 Shipment............................................................
EUROLIVE F1320D User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
EUROLIVE F1320D User Manual “Support” at behringer.com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product.
EUROLIVE F1320D User Manual 1. Before you Get Started 1.1 Shipment Your product was carefully packed at the factory to ensure safe transport. Nevertheless, if the box is damaged inspect the unit immediately for signs of damage. ◊ If the unit is damaged please do NOT return it to us, but notify your dealer and the shipping company immediately; otherwise, claims for damage or replacement may not be granted. ◊ Always use the original box to prevent damage during storage or transport.
EUROLIVE F1320D User Manual 2. Control Elements and Connections (5) This switch turns on the feedback filter. (6) This control adjusts the center frequency of the feedback filter. 2.1 Top panel (7) (1) (2) (3) (8) Fig. 2.4: LINK OUTPUT Fig. 2.1: First group control (1) The POWER LED lights up when the loudspeaker is put into operation. (2) The CLIP LED lights up when signal distortion occurs.
EUROLIVE F1320D User Manual 3. Operation Connecting a signal source Use the Monitor/Aux output of a mixer to route the audio signal to the F1320D. When using the monitor mix with more loudspeakers, route the audio signal of the first F1320D to the next speaker via the LINK output. The volume level of each F1320D is adjusted with the respective LEVEL control. • Turn the LEVEL control fully to the left. • Connect the signal source to the MIC/LINE input. • Turn on the F1320D. 3.
EUROLIVE F1320D User Manual 4. Audio Connectors Both audio inputs of the BEHRINGER F1320D and the LINK OUTPUT connector are fully balanced. To maximize interference compensation, try to establish balanced connections to other equipment, whenever possible. Balanced ¼" TRS connector strain relief clamp sleeve ring tip sleeve ground/shield ring cold (-ve) tip hot (+ve) For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. Fig. 4.
EUROLIVE F1320D User Manual Power Supply/Voltage (Fuses) USA/Canada 120 V~, 60 Hz (T 4.0 A H 250 V) UK/Australia 240 V~, 50 Hz (T 2.0 A H 250 V) Europe 230 V~, 50 Hz (T 2.0 A H 250 V) Korea 220 V~, 60 Hz (T 2.0 A H 250 V) China 220 V~, 50 Hz (T 2.0 A H 250 V) Japan 100 V~, 50/60 Hz (T 4.0 A H 250 V) Power consumption max. 300 Watts Power supply switch mode Mains connection standard IEC receptacle Dimensions/Weight Dimensions (H x W x D) appr. 14.2 x 22.8 x 16" appr.
We Hear You
