Instruction Sheet

TECHNICAL SPECIFICATIONS AND APPEARANCE ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE INFORMATION CONTAINED HEREIN IS CORRECT AT THE TIME OF PRINTING. ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.
MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY
VARY SLIGHTLY FROM PRODUCT. BEHRINGER PRODUCTS ARE SOLD THROUGH AUTHORIZED DEALERS ONLY. DISTRIBUTORS AND DEALERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS
OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND
RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2011 MUSIC GROUP IP LTD. TRIDENT CHAMBERS, WICKHAMS CAY, P.O. BOX 146, ROAD TOWN, TORTOLA,
BRITISH VIRGIN ISLANDS
INSTRUCTIONS FOR QUALIFIED PERSONNEL ONLY
MOUNTING SPEAKERS
1. Mounting the Bracket to the Wall
WARNING:
The operation of your speaker cabinet as part of a own system, if installed incorrectly and improperly, can potentially expose persons to serious health risks and even
death. Please ensure that electrical, mechanical and acoustic considerations are discussed with qualied and certied (by local, state or national authorities) personnel
prior to any installation or ying. Make sure that speaker cabinets are set up and own by qualied and certied personnel only, using dedicated equipment and
original parts and components delivered with the unit. If any parts or components are missing please contact your dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group assumes no liability for any damage or personal injury
resulting from improper use, installation or operation of the product! Regular checks must be conducted by qualied personnel to ensure that the system remains in a
secure and stable condition. Make sure that the speaker is not suspended overhead of people. Do not y the speaker in areas which can be entered or used by members
of the public.
◊ Speakers create a magnetic field, even if not in operation. Therefore, please keep all materials which can be affected by such fields
(disks, computers, monitors etc.) at a safe distance of 1 to 2 meters.
2. Attaching the Loudspeaker to theBracket
Fasten the supplied cylindrical tting to the bracket’s bottom arm with one of the two wing screws. Place the loudspeaker’s bottom-end ange onto the tting.
Next,move the bracket until the hole in the upper arm is centered above the loudspeaker’s top-end opening. Then, tightly fasten the top end of the loudspeaker
withthe second wing screw provided.
Fig. 1: Attaching the loudspeaker to the bracket
Fig. 2: Fastening the upper wing screw