Product Information

Premium 12-Input Mic/Line Rack Mixer with
XENYX Mic Preampli ers, British EQ’s and
Multi-FX Processor
Rackmount Mixers
EURORACK PRO
RX1202FX
Product Information Document
3 of 6
Taking Control
Smooth 60 mm faders and intuitive rotary dials make it quick and simple to create a great mix.
The Main Mix fader adjusts the volume of the Main Output signal, while the dual 4-segment LED
ladder display gives a visual con rmation of the signal level. The Phones jack features a dedicated
Phones/Control Room dial for adjusting the volume. Push CD/Tape To Mix to add backing tracks
from an mp3 or CD player, or the CD/Tape To Ctrl to isolate a click or scratch track in the headphones
during recording.
Panel Discussion
On the RX1202FX’s rear panel, the Left and Right Main Out XLR connections can be used to feed
the mix to a recording device or PA system. For live performances, keep pre-recorded music cued
up for between-set breaks by connecting a CD or mp3 player via the stereo 2-Track In jacks. If the
band wants a recording of their performance, you can send the signal to a recording device via the
2-Track Out jacks. Use the Mon Aux Send to send the monitor bus signal to your  oor monitors in a
live performance, or to a headphone amp in a recording session. When its time for playback of the
recorded material, just send the signal to your studio monitors via the Ctrl Out jack.
Panel Discussion
On the RX1202FX’s rear panel, the Left and Right Main Out XLR connections can be used to feed
the mix to a recording device or PA system. For live performances, keep pre-recorded music cued
up for between-set breaks by connecting a CD or mp3 player via the stereo 2-Track In jacks. If the
band wants a recording of their performance, you can send the signal to a recording device via the
2-Track Out jacks. Use the Mon Aux Send to send the monitor bus signal to your  oor monitors in a
live performance, or to a headphone amp in a recording session. When its time for playback of the
recorded material, just send the signal to your studio monitors via the Ctrl Out jack.