Quick Start Guide

22 EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO Quick Start Guide 23
Specications
UB2442FX-PRO UB2222FX-PRO UB1832FX-PRO UB1622FX-PRO
Microphone Inputs (IMP Invisible Mic Preamp)
Type XLR, electronically balanced, discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB / 135.7 dB A-weighted
@ 50 Ω source resistance -131 dB / 133.3 dB A-weighted
@ 150 Ω source resistance -129 dB / 130.5 dB A-weighted
Frequency response <10 Hz - 150 kHz (-1 dB), <10 Hz - 200 kHz (-3 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB Gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted (0 dBu In @ +22 dB gain)
Distortion (THD+N) 0.005% / 0.004% A-weighted
Line Input
Type ¼" TRS connector electronically balanced
Impedance approx. 20 kΩ balanced, 10 kΩ unbalanced
Gain range -10 to +40 dB
Max. input level 30 dBu
Fade-Out Attenuation (Crosstalk Attenuation)
Main fader closed 90 dB
Channel muted 89 dB
Channel fader closed 89 dB
Frequency Response
Microphone Input to Main Out
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Stereo Inputs
Type ¼" TRS connector electronically balanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
EQ Mono Channels
Low 80 Hz / ±15 dB
Mid 100 Hz - 8 kHz / ±15 dB
High 12 kHz / ±15 dB
EQ Stereo Channels
Low 80 Hz / ±15 dB
Low Mid 500 kHz / ±15 dB
High Mid 3 kHz / ±15 dB
High 12 kHz / ±15 dB
Aux Sends
Type ¼" TS connector unbalanced
Impedance approx. 120 kΩ
Max. output level +22 dBu
Stereo Aux Returns
Type ¼" TRS connector electronically balanced
Impedance approx. 20 kΩ bal. / 10 kΩ unbal.
Max. input level +22 dBu
UB2442FX-PRO UB2222FX-PRO UB1832FX-PRO UB1622FX-PRO
Main Outputs
Type
XLR, electronically balanced
and ¼" TRS balanced
XLR, electronically balanced
and ¼" TRS balanced
XLR, electronically balanced
and ¼" TRS balanced
¼" TS connector unbalanced
Impedance approx. 240 Ω symm. / 120 Ω unbalanced
Max. output level +28 dBu +28 dBu +28 dBu +22 dBu
Control Room Outputs
Type ¼" TS connector unbalanced
Impedance approx. 120 kΩ
Max. input level +22 dBu
Headphones Outputs
Type ¼" TRS connector unbalanced
Max. ouput level +19 dBu / 150 Ω (+25 dBm)
DSP 24-bit
Converter 24-bit Sigma-Delta, 64/128-times oversampling
Sampling rate 40 kHz
Frequency Response
Microphone Input to Main Out
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Main Mix System Data
2
Noise
Main mix @ -∞,
Channel fader @ -∞
-100 dB -101 dB -101 dB -101 dB
Main mix @ -0 dB,
Channel fader @ -∞
-87 dB -93 dB -93 dB -96 dB
Main mix @ 0 dB,
Channel fader @ 0 dB
-80 dB -93 dB -93 dB -83 dB
Power Supply
Mains voltage 100 to 240 V~, 50/60 Hz
Power consumption 47 W 46 W 43 W 37 W
Fuse 100 - 240 V ~: T 1.6 A H 250 V
Mains connection Standard IEC receptacle
Physical/Weight (Net)
Dimensions (H x W x D)
approx. 5.3 x 17.3 x 16.5"
approx. 135 x 440 x 420 mm
approx. 3.5 x 16.9 x 14"
approx. 90 x 430 x 355 mm
approx. 3.5 x 16.9 x 14"
approx. 90 x 430 x 355 mm
approx. 3.8 x 11.9 x 13.8"
approx. 97 x 301 x 351 mm
Weight (Net) approx. 14.5 lbs / 6.6 kg approx. 12.1 lbs / 5.5 kg approx. 11.7 lbs / 5.3 kg approx. 9.5 lbs / 4.3 kg
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix; channels 1/3 as far left as possible, channels 2/4 as far right as possible. Reference = +6 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or liiustrated.