Specifications

44
45
Crossovers DI Boxes
3-way stereo/4-way mono crossovert
24 dB/octave, state-variable Linkwitz-Riley fi lters for t
precise frequency separation
Absolutely fl at summed amplitude response, zero t
phase diff erence
2-way stereo/3-way mono crossovert
24 dB/octave, state-variable Linkwitz-Riley fi lters for t
precise frequency separation
Flat summed amplitude response, t
zero phase diff erence
Professional, multi-purpose 8-channel direct t
injection box
Converts unbalanced line inputs into balanced outputst
Optional mains or phantom powered operationt
Ultra-fl at frequency response due to servo-t
balanced operation
Professional 4-channel active direct injection boxt
Converts unbalanced line inputs to balanced outputst
Extremely linear frequency response from 10 Hz to t
50 kHz
+20 dB gain switch for preamplifi cation of t
low- level signals
SUPER-X PRO CX3400
SUPER-X PRO CX2310
ULTRA-DI PRO DI800
ULTRA-DI PRO DI4000
Individual limiter and polarity reverse switch t
per output
Adjustable time delay for phase alignment and t
“Low Sum” function for subwoofer operation
Separate subwoofer outputt
Polarity reverse switch per outputt
Adjustable time delay for phase alignmentt
Separate subwoofer output with independent t
frequency control
Allows direct connection to speaker outputs with up to t
3,000-Watts
Ultra-low noise operational amplifi ers for outstanding t
audio performance
+20 dB gain switch for pre-ampli fi cation of t
low- level signals
Attenuation switch for input levels up to +40 dBut
Switchable attenuation allows maximum input t
of +50 dB
S/N ratio –95 dB, THD <0.005%t
Phase reverse switch for instant correction of t
phase problems
BEHRINGER OT-1 output transformer for full t
galvanic insulation
Internal battery t
automatically shuts off
when phantom power is
connected
Direct connection t
of amplifi er outputs
with ratings of up to
3,000 Watts
Professional Active t
2-Channel DI-Box/
Splitter
Converts 2 separate t
unbalanced ¼" TRS line
inputs into 2 balanced
XLR outputs
Ultra-fl exible: mono, t
2-channel or stereo
DI box operation with
switchable Link mode
ULTRA-DI DI100
ULTRA-DI DI20
Switchable input attenuation allows input levels of up t
to +50 dB
Ground lift switch eliminates typical ground t
loop problems
Rugged, road-proof aluminum caset
Stackable oversized rubber cornerst
BEHRINGER OT-1 output transformer for full t
galvanic insulation
Additional Split mode (channel 1 assigns the signal to t
both XLR outputs)
Phantom or 9 V battery poweredt
Switchable input attenuation allows connection to t
outputs with up to 3,000 Watts
Input 2 usable as channel 1 Link output (additional to t
XLR output)
Ground lift switch eliminates typical ground t
loop problems
Ultra-compact, road-suitable housingt
ULTRA-DI DI600P
ULTRA-DI DI400P
MICROHD HD400
ULTRA-CURVE PRO DEQ2496
Ultra high-precision digital 24-bit/96 kHz loudspeaker t
management system with 3 inputs and 6 outputs
Individual crossover fi lter types with selectable roll-off t
characteristics from 6 to 48 dB/octave, four diff erent
mono/stereo output operating modes
“Zero”-attack limiters on all output channels for t
speaker protection
Precise dynamic EQs and extremely musical parametric t
EQs, selectable for all inputs and outputs
Adjustable delays for all 3 analog inputs t
(one switchable for digital AES/EBU input) and
6 analog outputs
Integrated sample rate converter (32 to 96 kHz) for t
easy connection of external digital sources
ULTRA-DRIVE PRO DCX2496
Connect your guitar or bass directly to your mixer t
without losing tone due to impedance mismatches,
long cables and cycle hum
Converts any unbalanced line-level signal to balanced t
mic-level output
Provides impedance and signal matching for the direct t
connection of instruments to amplifi ers and mixers
Connect your guitar or bass directly to your mixer t
without losing tone due to impedance mismatches,
long cables and cycle hum
Converts any unbalanced line-level signal to balanced t
mic-level output
Provides impedance and signal matching for the direct t
connection of instruments to amplifi ers and mixers
Ultra-high resolution processor t
for all EQ, RTA and dynamic
applications, especially for PA and
audiophile mastering
4 concurrently selectable EQ modules (31-band graphic t
EQ, 10-band parametric EQ, Feedback Destroyer plus
3 Dynamic EQs per stereo channel)
Flexible compressor/expander function with peak t
limiter per stereo channel as well as additional stereo
imager and stereo delay for delay line applications
Unique VPQ (Virtual Paragraphic EQ) option allows t
parametric control of graphic EQs
Ultra-high resolution 61-band real-time FFT analyzer t
with additional auto EQ function for room and
loudspeaker equalization
Allows the use of long cables without losing t
high frequencies
Thru/Out jack lets you send the unbalanced signal to an t
onstage amplifi er while the balanced signal is routed
to the mixer
Switchable input for connecting instruments or t
amplifi ers with outputs up to 3,000 Watts
Filter switch reduces annoying hiss and buzzt
Ground lift switch eliminates typical ground loop t
problems such as hum
High-performance transformer for ultimate t
signal integrity
Ultra-compact, all-metal and road-suitable housingt
Allows the use of long cables without losing t
high frequencies
Thru/Out jack lets you send the unbalanced signal to an t
onstage amplifi er while the balanced signal is routed
to the mixer
Ground lift switch eliminates typical ground loop t
problems such as hum
High-performance transformer for ultimate t
signal integrity
Ultra-compact, all-metal and road-suitable housingt
Multi-functional level meters (peak/RMS, VU and SPL t
meter with dBA/dBC weighting via RTA/Mic input)
64 user memories for complete setups and/or t
individual module confi gurations
Separate RTA mic/line input with phantom power, t
professional Wordclock input and MIDI connections for
full remote control, preset dumps and system updates
Ultra-high resolution 24-bit/96 kHz A/D- and D/A t
converters (113 dB dynamic range)
Open architecture allowing future software updates t
via MIDI
2 high-performance 32/40-bit fl oating-point DSPs for t
ultimate sonic resolution
Removes AC hum and noise - fast, easy and reliablet
Breaks ground loops safely, while keeping highest t
sonic quality
Automatically converts unbalanced to balanced signals t
without any signal loss
Two ¼" TRS inputs and outputs for 2 mono or t
1 stereo signal
Equalizers
High-quality active t
direct injection box
with switchable 4 x 12"
speaker simulation
Switchable input t
attenuation for input
levels of up to +48 dBu
Ground lift switch t
eliminates typical ground loop problems
Internal battery automatically shuts off when phantom t
power is connected
Direct connection of amp outputs with ratings of up to t
3,000 Watts
Rugged, road-proof aluminum caset
Stackable oversized rubber cornerst
BEHRINGER OT-1 output transformer for full galvanic t
insulation and S/N ratio of over 100 dB
ULTRA-G GI100
You wouldn’t want your
speaker system’s high
frequencies coming out
of the woofer, and you
definitely wouldn’t want
those all-important lows
bleeding into the horn!
That’s why you need a
crossover. Whether you’re a
sound engineer, concert hall
operator or a movie theater
sound tech, crossovers help
you deliver a breathtaking
spectrum of sound that
accurately meets your most
painstaking specifications.