User's Manual

9 EUROPOWER PMP1680S/PMP980S/PMP960M User Manual
◊ Please use a dual footswitch for the PMP980S/PMP1680S, so that you
can enable/disable FX 1 and FX 2 independently of each other. In this
case, the tip of the ¼" plug controls FX 1, and the ring FX 2.
Fig. 4.5: RCA cable
shield
sleevesleeve
tip tip
4.3 Loudspeaker connection
Your PMP mixer is equipped with high-quality twist-lock professional style
loudspeaker connectors, which ensure safe and trouble-free operation.
Thisconnector was especially developed for high-power loudspeakers. Once it is
plugged in, it safely locks into position and cannot be accidentally disengaged.
Itprevents the occurrence of electrical shock and ensures the correct polarity.
Each of the connectors carries only the assigned single signal (see tab. 4.1/g. 4.7
and the information on the rear panel of the power mixer).
Fig. 4.6: Professional twist-lock style connector
1-
2-
2+
1+
1-
2-
2+
1+
front view rear view
Professional speaker connector
(compatible with Neutrik Speakon connectors)
Please be sure to only use professional locking-style speaker cables (type NL4FC).
Please check the pin connections of your loudspeakers and cables depending on
the EUROPOWER speaker output you choose.
EUROPOWER PMP980S/PMP1680S
OUPUT A 1+ 1- 2+ 2-
MAIN L POS NEG – –
MON POS NEG – –
OUTPUT B – – POS NEG
OUTPUT B 1+ 1- 2+ 2-
MAIN R POS NEG – –
MONO POS NEG – –
BRIDGE POS – NEG –
EUROPOWER PMP960M
OUTPUT A 1+ 1- 2+ 2-
MAIN MONO POS NEG – –
MON POS NEG – –
BRIDGE – – – –
OUTPUT B 1+ 1- 2+ 2-
MAIN MONO POS NEG – –
MAIN POS NEG – –
BRIDGE POS – NEG –
Tab 4.1: Pin connections of loudspeaker connectors
OUTPUT B
BRIDGE
1+
1+
2+
1+
1- 1-
8 Ω
4 Ω
8 Ω
4 Ω
16 Ω
8 Ω
OUTPUT B
Fig. 4.7: Connector assignment