User Manual EUROPOWER PMP1000/PMP4000/PMP6000 500/1600-Watt 12, 16 and 20-Channel Powered Mixer with Multi/Dual Multi-FX Processor and FBQ Feedback Detection System
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual Table of Contents Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 Before you get started....................................................... 5 1.1.1 Shipment.................................
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with 1/4" TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual (2) Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by MUSIC Group. (3) Shipments without freight prepaid will not be accepted. § 4 Warranty Exclusions (1) This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual 1. Introduction Congratulations! With the PMP1000/PMP4000/PMP6000 you have acquired a state-of-the-art power mixer that sets new standards. Right from the very start it has been our goal to design a revolutionary unit that can be used for a wide variety of applications. Indeed, this overwhelming power mixer gives you plenty of functionality and a broad range of connection and expansion options.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual (57) (58) (61) (62) (65) (55) (18) (35) (19) (22) (20) (60) (64) (1) (2) (21) (27) (26) (30) (3) (4) (6) (8) (31) (9) (36) (43) (11) (13) (14) (32) (33) (34) (39) (37) (56) (44) (42) (40) (52) (29) (16) (17) (47) EUROPOWER PMP1000 FRONT PANEL (46) (54) (48)
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual (56) (55) (57) (58) (59) (62) (18) (23) (63) (64) (19) (22) (65) (20) (26) (1) (2) (60) (61) (27) (43) (44) (21) (3) (4) (24) (31) (34) (32) (30) (33) (5) (6) (25) (8) (9) (35) (54) (10) (36) (38) (53) (37) (40) (42) (52) (11) (13) (15) (16) (14) (45) (41) (17) (46) EUROPOWER PMP4000 FRONT PANEL (47) (48) (49)
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual (56) (55) (57) (58) (59) (62) (18) (23) (63) (19) (64) (22) (20) (65) (26) (1) (2) (60) (61) (27) (28) (29) (21) (3) (4) (34) (31) (24) (5) (6) (32) (25) (33) (7) (8) (35) (9) (36) (11) (12) (15) (16) (53) (37) (10) (13) (54) (14) (38) (39) (52) (42) (43) (40) (44) (50) (41) (51) (45) (17) (46) EUROPOWER PMP6000 FRONT PANEL (47) (48) (49)
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual (66) (67) (69) (70) (68) (72) (71) EUROPOWER PMP6000 REAR PANEL 2. Control Elements A detailed description of all functions of your power mixer can be found in the following chapters. Please also refer to the enclosed sheet with the numbered illustrations to get a good overview of the control layout. 2.1 Mono and stereo channels (1) Use the GAIN control to adjust the input gain.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual ◊ PMP1000: This does not apply to the mono/stereo combination channels 5/6 and 7/8. (27) The AMP MODE switch determines the mode of operation of the PMP amplifier stage: (20) INSERT I/O. Insert points or simply inserts are used to process a signal with dynamic processors or equalizers. They are pre-fader, pre-EQ and pre-MON/ FX SEND.
(31) EUROPOWER PMP1000/PMP4000/PMP6000 User Manual Press the FBQ IN switch to activate the Feedback Detection system (the FBQ will be active only if you have switched on the equalizer (33) before). Frequencies causing feedback are shown by brightly lit fader LEDs. All other LEDs will be darker. Now, cut the frequency range in question until feedback disappears (the LED gets darker or goes out). This function is available for both the main and monitor mix.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual 2.4.1 Connectors (55) Use the CD/TAPE INPUT jacks (RCA) to connect an external stereo signal, such as a CD player, tape deck or other line-level sources. (56) The VOICE CANCELLER filters vocal-specific frequencies from the CD/TAPE INPUT signal. This function can be used for karaoke, i.e. you can remove the vocals from a song and then sing along with the music yourself. (57) The CD/TAPE OUTPUT provides the line level stereo signal (e.g.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual Effect Presets of EUROPOWER PMP6000 No. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 EFFECT Description HALL 00-09 SMALL HALL 1 approx. 1.0s reverb decay SMALL HALL 2 approx. 1.2s reverb decay SMALL HALL 3 approx. 1.5s reverb decay MID HALL 1 approx. 1.8s reverb decay MID HALL 2 approx. 2.0s reverb decay MID HALL 3 approx. 2.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual 4. Installation 4.1 Mains connection Balanced ¼" TRS connector strain relief clamp The mains connection is made using the enclosed power cord and a standard IEC receptacle. It meets all of the international safety certification requirements. sleeve ring Blown fuses must be replaced by fuses of the same type and rating. tip ◊ Please make sure that all units have a proper ground connection.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual ¼" TRS footswitch connector Professional speaker connector strain relief clamp sleeve ring tip 1+ 1+ 1- 2sleeve ground/shield 1- 2+ 2+ front view ring FX2 tip FX1 2- rear view Fig. 4.6: Professional speaker connector with polarity allocation Please be sure to only use commercial cables (type NL4FC) for connecting your loudspeakers to the power mixer.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual 5. Wiring Examples Subwoofer F.O.H. mix Monitor mix Loudspeaker connection (monitor mix) PMP1000 PMP4000 PMP6000 Rear panel EUROPOWER EP2000 PMP1000 PMP4000 PMP6000 (part view) 2 x BEHRINGER EUROLIVE Stack (B1800X & B1220, both passive) Loudspeaker connection (monitor mix) EUROLIVE VP1520 front panel (part view) EUROLIVE B1800X Subwoofer Footswitch Link Output 2 x BEHRINGER F1220D (active) Fig. 5.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual Keyboard Loudspeaker connection for F.O.H and monitor mix (mono) ULTRA-G GI100 V-AMP2 Electric bass Vocal mics PMP1000/PMP4000/PMP6000 Rear panel (excerpt) Electric guitar Stereo channel 13/14 CD player Mono channel 5 Mono channels 1-4 2 x BEHRINGER EUROLIVE VP1520 (passive) DAT recorder Mono channel 6 CD/tape in CD/tape out 2 x BEHRINGER EUROLIVE VP1220F (passive) Fig. 5.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual BEHRINGER EUROLIVE VP1220 BEHRINGER EUROLIVE VP1220 BEHRINGER EUROLIVE B1800X BEHRINGER EUROLIVE B1800X PMP1000/PMP4000/ PMP6000 Rear panel Output B Output A Vocals/voice BEHRINGER XM1800S B1800-Pro Active Subwoofer BEHRINGER EUROPOWER EP2000 Drums/percussion MAIN 1 OUT BEHRINGER B-2 PRO MONO OUT Stereo inputs Keyboard BEHRINGER V-AMP 3 PHONS/CTRL OUT MON 1/2 OUT Headphone amplifier BEHRINGER POWERPLAY PRO-XL HA4700 Drum Computer CD/TAPE I
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual 6. Specifications PMP1000 Microphone Inputs Type Stereo Outputs XLR, electronically balanced input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ohm source resistance -134 dB / 136 dB A-weighted @ 50 Ohm source resistance -131.5 dB / 134 dB A-weighted @ 150 Ohm source resistance -129 dB / 155 dB A-weighted Frequency response < 10 Hz - 200 kHz (-1 dB) < 10 Hz - > 200 kHz (-3 dB) Gain +10 dB, +60 dB Max.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual PMP4000 Power Supply Microphone Inputs Mains voltage Type USA/Canada 120 V~, 60 Hz China/Korea 220 V~, 50/60 Hz Europe/Australia 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz Fuse 100 - 120 V~ T 5 A H 250 V Fuse 220 - 240 V~ T 5 A H 250 V Power Consumption Power consumption 500 W Mains connector IEC standard receptacle Dimensions/Weight Dimensions (H x W x D) Weight 4 7/8 x 15 3/8 x 16 3/4" 122 x 390 x 425 mm XLR, electronically balanced in
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual Monitor Power Supply Type ¼" TRS connectors, unbalanced Mains voltage Impedance approx. 150 Ohm, unbalanced USA/Canada 120 V~, 60 Hz Max. output level +21 dBu China/Korea 220 V~, 50/60 Hz Europe/Australia 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz Fuse 100 - 120 V~ T 10 A H 250 V Fuse 220 - 240 V~ T 6.3 A H 250 V Stereo Outputs Type ¼" TRS connectors, unbalanced Impedance approx. 150 Ohm, unbalanced Max.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual PMP6000 Microphone Inputs Type Monitor XLR, electronically balanced input circuit Type ¼" TRS connectors, unbalanced Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ohm source resistance -134 dB / 136 dB A-weighted @ 50 Ohm source resistance -131.5 dB / 134 dB A-weighted @ 150 Ohm source resistance -129 dB / 155 dB A-weighted Frequency response < 10 Hz - 200 kHz (-1 dB) < 10 Hz - > 200 kHz (-3 dB) Gain +10 dB, +60 dB Max.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual Power Supply Mains voltage USA/Canada 120 V~, 60 Hz China/Korea 220 V~, 50/60 Hz Europe/Australia 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz Fuse 100 - 120 V~ T 10 A H 250 V Fuse 220 - 240 V~ T 6.3 A H 250 V Power Consumption Power consumption 1,050 W Mains connector IEC standard receptacle Dimensions/Weight Dimensions (H x W x D) 4 7/8 x 23 1/2 x 19 1/2" 122 x 596 x 496 mm Weight 28.9 lbs / 13.
EUROPOWER PMP1000/PMP4000/PMP6000 User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION EUROPOWER PMP1000/PMP4000/PMP6000 Responsible party name: MUSIC Group Services USA, Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.