Version 1.
EURORACK PRO RX1202FX IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
EURORACK PRO RX1202FX EURORACK PRO Ultra Low-Noise Design 12-Input Mic/Line Rack Mixer with Premium Mic Preamplifiers and 24-Bit Multi-FX Processor V 8 new state-of-the-art, studio-grade IMP "Invisible" Mic Preamps with: - 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs - Ultra-wide 60 dB gain range RX1202FX V Ultra low-noise ULN design, highest possible headroom, ultra-transparent audio V Integrated 24-bit digital stereo FX processor with 100 awesome presets including reverb, chorus, flan
EURORACK PRO RX1202FX FOREWORD TABLE OF CONTENTS Dear Customer, Welcome to the community of EURORACK PRO users and thank you very much for expressing your confidence in BEHRINGER products by purchasing the RX1202FX. It is one of my most pleasant tasks to write this letter to you, because it is the culmination of many months of hard work delivered by our engineering team to reach a very ambitious goal: to design an outstanding device whose high level of functionality will give you maximum performance.
EURORACK PRO RX1202FX V V They are perfectly matched to every conceivable microphone with up to 60 dB gain and +48 volt phantom power supply A mixing console fulfils three main functions: 1.2 The user’s manual The user’s manual is designed to give you both an overview of the controls, as well as detailed information on how to use them. In order to help you understand the links between the controls, we have arranged them in groups according to their function.
EURORACK PRO RX1202FX 2. CONTROL ELEMENTS AND CONNECTORS This chapter describes the various control elements of your mixing console. All controls, switches and connectors will be discussed in detail. 2.
EURORACK PRO RX1202FX The second value range (+10 to -40 dBu) refers to the line input and shows its sensitivity. The settings for equipment with standard line-level signals (-10 dBV or +4 dBu) look like this: While the TRIM control is turned all the way down, connect your equipment. Set the TRIM control to the external devices’ standard output level. If that unit has an output signal level display, it should show 0 dB during signal peaks. For +4 dBu, turn up TRIM slightly, for -10 dBV a bit more.
EURORACK PRO RX1202FX 2.3 Connector array of the main section CD/TAPE OUT These connections are laid out as RCA connectors and are wired parallel to MAIN OUT. Connect the inputs of a computer sound card or a recorder here. The output signal level is set up using the highly accurate MAIN MIX fader.
EURORACK PRO RX1202FX When recording to an analog device, the VU meters of the recording machine should reach approx. +3 dB with lowfrequency signals (e.g. kick drum). Due to theio70.0.iae VU meterfrequenies above0 1 Hz.
EURORACK PRO RX1202FX 2.5 Digital effects processor CLIP POWER switch Use the POWER switch to turn on the mixing console. The POWER switch should always be in the “Off” position when you are about to connect your unit to the mains. To disconnect the unit from the mains, pull out the main cord plug. When installing the product, ensure that the plug is easily accessible.
EURORACK PRO RX1202FX 3. APPLICATIONS 3.
EURORACK PRO RX1202FX 3.
EURORACK PRO RX1202FX 4. INSTALLATION 4.1 Mains connection AC POWER IN The power supply is delivered through the power supply line to be found on the backside. The connection complies with the required security regulations. Never connect the EURORACK to the power supply line while the latter is already connected to the mains! Rather connect the console with the power supply line before plugging it into the mains. Please note that the mixer warms up when in operation. This is absolutely normal. 4.
EURORACK PRO RX1202FX 5. SPECIFICATIONS MONO INPUTS MIC (IMP Invisible Mic Preamp) Type XLR, electr. balanced Mic E.I.N. (20 Hz – 20 kHz) @ 0 Ω source resistance -132 dB / -134 dB A-weighted @ 50 Ω source resistance -130 dB / -132 dB A-weighted @ 150 Ω source resistance -128 dB / -130 dB A-weighted Frequency response <10 Hz – 200 kHz Gain range Max. input level Impedance Signal-to-noise ratio +10 to +60 dB +12 dBu @ +10 dB gain approx. 2.6 kΩ balanced -110 dB / -112 dB A-weighted Distortion (THD+N) 0.
EURORACK PRO RX1202FX 6. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law. 2.
