24–BIT DUAL ENGINE DSP 24–BIT DUAL ENGINE DSP 24–BIT DUAL ENGINE DSP 24–BIT DUAL ENGINE DSP LEVEL LEVEL 24–BIT A/D & D/A CONVERTER 24–BIT A/D & D/A CONVERTER User Manual EURORACK UB2442 -PRO Ultra-Low Noise Design 24-Input 4-Bus Mic/Line Mixer with Premium Mic Preamplifiers and Multi-FX Processor UB2222 -PRO/UB1622 -PRO Ultra-Low Noise Design 22/16-Input 2/2-Bus Mic/Line Mixer with Premium Mic Preamplifiers and Multi-FX Processor UB1832 -PRO Ultra-Low Noise Design 18-Input 3/2-Bus Mic/Line
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual “Support” at behringer.com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual 1. Introduction 1.1 General mixing console functions The BEHRINGER EURORACK mixing console offers you premium-quality microphone preamplifiers with optional phantom power supply, balanced line inputs and the ability to connect external effects devices. Because of its extensive and carefully thought-out routing possibilities, your EURORACK lends itself equally to both live and studio use.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual 1.2 The user’s manual 2. Control Elements and Connectors The user’s manual is designed to give you both an overview of the controls, as well as detailed information on how to use them. In order to help you understand the links between the controls, we have arranged them in groups according to their function. If you need to know more about specific issues, please visit our website at http://behringer.com.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual GAIN 2.1.3 Monitor and effects busses (Aux Sends) Use the GAIN control to adjust the input gain. This control should always be turned fully counter-clockwise whenever you connect or disconnect a signal source to one of the inputs. The scale has 2 different value ranges: the first value range (+10 to +60 dB) refers to the MIC input and shows the amplification for the signals fed in there.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual 2.1.4 Routing switch, PAN, SOLO and channel fader SUB (1-2 and 3-4) The SUB switch routes the signal to the corresponding subgroups. The UB2442FX-PRO has 4 subgroups (1-2 and 3-4). MAIN The MAIN switch routes the signal to the main mix bus. The channel fader determines the channel’s volume in the main mix (or submix). 2.2 Stereo channels 2.2.1 Channel inputs UB2442FX–PRO Fig. 2.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual LEVEL AUX SEND 1, 2 and 4 For level matching, the stereo inputs on the UB1622FX-PRO, UB1832FX-PRO and UB2222FX-PRO have a LEVEL switch to select between +4 dBu and -10 dBV. At -10 dBV (homerecording level), the input is more sensitive than at +4 dBu (studio level). The AUX SEND 1 control governs the master send level of the mix created by the individual channel AUX 1 sends.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual AUX SEND (FX) 2.3.4 The monitor section of the UB1832FX-PRO The AUX SEND (FX) jack carries the master aux mix (from the channel’s FX controls). You can connect this to an external effects device to process the FX bus. The processed signal can then be brought from the effects device back into the STEREO AUX RETURN jacks.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual STEREO AUX RETURN 1/2 (TO AUX SEND) MAIN MIX / TO SUBS The two right-hand STEREO AUX RETURN controls have a special function: they can be used to add an effect to a monitor mix. An example follows (UB1622FX-PRO wired to an effects device): This switch routes the signal fed in via the STEREO AUX RETURN FX jacks either to the main mix (not pressed) or to the submix (pressed).
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual 2.3.7 XPQ Surround function (UB1832FX-PRO only) 2-TRACK OUTPUT These connectors are wired in parallel to the MAIN OUT and carry the main mix signal (unbalanced). Connect this to the inputs of your recording device. The final output level can be adjusted via the high-precision MAIN MIX fader.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual POWER The blue POWER LED indicates that the device is switched on. +48 V The red “+48 V” LED lights up when phantom power is switched on. Phantom power is required to operate condenser microphones. ◊ While phantom power is switched on, do not connect or disconnect microphones on the mixer (or the stagebox/wallbox). Connect any micro-phones before switching on phantom power.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual 3. Graphic 9-Band Equalizer (UB1832FX-PRO only) 24–BIT DUAL ENGINE DSP UB1832FX-PRO Fig. 3.1: The graphic stereo equalizer of the UB1832FX‑PRO LEVEL 24–BIT A/D & D/A CONVERTER All Models The graphic stereo equalizer allows you to tailor the sound to the room acoustics. Fig. 4.1: Digital effects module EQUALIZER FX OUT Use this switch to activate the graphic equalizer.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual 5. Rear Panel Connectors 5.3 Inserts 5.1 Main mix outputs, insert points and control room outputs UB1622FX-PRO Fig. 5.3: Insert points ◊ On the UB2442FX-PRO the channel insert points are located on the control panel between the line input and the GAIN control. UB2442FX-PRO Fig. 5.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual POWER switch 6.2 Cable connections Use the POWER switch to turn on the mixing console. The POWER switch should always be in the “Off” position when you are about to connect your unit to the mains. You will need a large number of cables for the various connections of the console. The illustrations below show the wiring of these cables. Be sure to use only high-grade cables.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual Unbalanced ¼" TS connector Insert send return ¼" TRS connector strain relief clamp strain relief clamp sleeve tip sleeve ring tip sleeve (ground/shield) sleeve ground/shield tip (signal) ring return (in) tip send (out) Connect the insert send with the input and the insert return with the output of the effects device. Fig. 6.3: 1/4" mono plug Fig. 6.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual 7. Specifications Microphone Inputs (IMP Invisible Mic Preamp) Type XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) EQ Stereo Channels Low 80 Hz / ±15 dB Low Mid 500 Hz / ±15 dB High Mid 3 kHz / ±15 dB High 12 kHz / ±15 dB @ 0 Ω source resistance -134 dB / 135.7 dB A-weighted @ 50 Ω source resistance -131 dB / 133.3 dB A-weighted @ 150 Ω source resistance -129 dB / 130.
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual Main Mix System Data2 Noise Main mix @ -∞, Channel fader @ -∞ -101 dB -100 dB (UB2442FX-PRO) Main mix @ -0 dB, Channel fader @ -∞ -93 dB -96 dB (UB1622FX-PRO) -87 dB (UB2442FX-PRO) Main mix @ 0 dB, Channel fader @ 0 dB -81 dB -83 dB (UB1622FX-PRO) -80 dB (UB2442FX-PRO) Power Supply Mains voltage 100 to 240 V~, 50/60 Hz Power consumption 47 W (UB2442FX-PRO) 46 W (UB2222FX-PRO) 43 W (UB1832FX-PRO) 37 W (UB1622FX-PRO) Fus
EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION EURORACK UB2442FX-PRO/UB2222FX-PRO/ UB1832FX-PRO/UB1622FX-PRO Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
We Hear You
