User Manual EURORACK UB1202 /UB1002 Ultra-Low Noise Design 12/10-Input 2-Bus Mic/Line Mixer with Premium Mic Preamplifiers and Multi-FX Processor
EURORACK UB1202FX/UB1002FX User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 General mixing console functions .................
EURORACK UB1202FX/UB1002FX User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
EURORACK UB1202FX/UB1002FX User Manual “Support” at behringer.com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product.
EURORACK UB1202FX/UB1002FX User Manual 1. Introduction Level-setting Congratulations! In purchasing our EURORACK UB1002FX/UB1202FX you have acquired a mixing console whose small size belies its incredible versatility and audio performance. Signals fed into the mixer using a DI-box (Direct Injection) or the output of a sound card or a keyboard, often have to be adjusted to the operating level of your mixing console.
EURORACK UB1202FX/UB1002FX User Manual ◊ Please always use the original packaging to avoid damage due to storage or shipping. ◊ Never let unsupervised children play with the EURORACK or with its packaging. ◊ Please dispose of all packaging materials in an 2. Control Elements and Connectors this chapter describes the various control elements of your mixing console. All controls, switches and connectors will be discussed in detail. 2.1 Mono channels environmentally-friendly fashion. 1 1.3.
EURORACK UB1202FX/UB1002FX User Manual GAIN LEVEL Use the GAIN control to adjust the input gain. This control should always be turned fully counterclockwise whenever you connect or disconnect a signal source to one of the inputs. the LEVEL control determines the level of the channel signal in the main mix. The scale has 2 different value ranges: the first value range (+10 to +60 dB) refers to the MIC input and shows the amplification for the signals fed in there.
EURORACK UB1202FX/UB1002FX User Manual LEVEL Live PA systems: The LEVEL control determines the volume of the channel being sent to the main mix. A stereo dynamics processor (optional), stereo equalizer (optional) and the stereo power amplifier for full-range loudspeakers with passive crossovers. +4/-10 The stereo inputs of the EURORACK have an input sensitivity switch which selects between +4 dBu and -10 dBV.
EURORACK UB1202FX/UB1002FX User Manual +48 V The red “+48 V” LED lights up when the phantom power is turned on. Phantom power is required to operate condenser microphones and is activated using the +48 V switch located above the +48 V LED. ◊ Connect microphones before you switch on the phantom power supply. Please do not connect microphones to the mixer (or the stagebox/wallbox) while the phantom power supply is switched on.
EURORACK UB1202FX/UB1002FX User Manual 3. Applications 3.1 Recording studio CD player MIDI sound module MD recorder Keyboard BEHRINGER HPS300 Headphones Active monitors BEHRINGER TRUTH B2030A Microphone BEHRINGER B-20 PRO Modeling amp BEHRINGER V-AMP3 Electric guitar BEHRINGER EURORACK UB1002FX Digital Audio Workstation Fig. 3.
EURORACK UB1202FX/UB1002FX User Manual 3.2 Live sound VIRTUALIZER PRO DSP2024P Fullrange loudspeaker cabinets EUROLIVE B1520PRO Keyboard Bass amplifier ULTRABASS BXD3000H BEHRINGER HPS3000 Headphones Power amp EUROPOWER EP2000 Bass cabinet ULTRABASS BB410 Drum Computer COMPOSER PRO-XL MDX2600 Bass guitar ULTRAGRAPH PRO FBQ3102 Microphones BEHRINGER XM1800S MD recorder VIRTUBE VT50FX CD player Electric guitar BEHRINGER EURORACK UB1202FX Fig. 3.
EURORACK UB1202FX/UB1002FX User Manual 4. Installation 4.1 Mains connection Balanced ¼" TRS connector strain relief clamp sleeve ring tip AC POWER IN Connect the power supply to the 3-pin mains connector on the rear of the console. Use the AC adapter supplied to connect the console to the mains. The adapter complies with all applicable safety standards. sleeve ground/shield ◊ Please use only the power supply unit provided with the console.
EURORACK UB1202FX/UB1002FX User Manual Line Input Main Mix System Data2 Type 1/4" TRS connector electronically balanced Impedance approx. 20 kΩ balanced approx. 10 kΩ unbalanced Gain range -10 to +40 dB Max.
EURORACK UB1202FX/UB1002FX User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION EURORACK UB1202FX/UB1002FX Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
We Hear You