User manual

10 F-CONTROL AUDIO FCA202 User Manual
behringer.com
Installation2.
IMPORTANT NOTES CONCERNING
INSTALLATION ON A PC!
To ensure that your FCA202 works properly, ◊
make sure you install the drivers before connecting
the hardware to the computer. Otherwise,
the hardware will not be correctly identified and in
some circumstances will not work correctly.
If you have already cable-connected your interface, ◊
break the connection between the FCA202 and
your computer, and then restart your system.
Then, install the drivers as described in Chapter 2.2.
Connect your audio interface only after you have
successfully completed the installation.
System requirements2.1
To work with the FCA202, your computer must fulfill the
following minimum requirements:
Installation under Windows XP2.2
Close all unnecessary programs before beginning the •
installation process.
Insert the driver CD. Use Windows Explorer to select the •
drive that contains the CD, and then start the setup file.
Follow the on-screen instructions and confirm that you •
want to continue with the installation until this has
been completed.
When the installation has been successfully completed, •
connect the hardware interface with the computer
via an unused FireWire socket. The hardware inputs
and outputs are now available to you in every audio
application.
During the installation process, you may be given a ◊
Windows message that the equipment drivers that
are to be installed have not passed the Windows
Logo test. Confirm this message and proceed as usual
with the installation. Your Windows installation will
not be affected by this in any way.