User Manual EUROLIVE F1220 Active 125-Watt Monitor Speaker System with 12" Woofer, 1" Compression Driver and Feedback Filter
EUROLIVE F1220A User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Before You Get Started.............................................. 5 1.1 Shipment.............................................................
EUROLIVE F1220A User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
EUROLIVE F1220A User Manual “Support” at behringer.com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product.
EUROLIVE F1220A User Manual 1. Before You Get Started 1.3 Online Registration 1.1 Shipment Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully. Your product was carefully packed at the factory to ensure safe transport. Nevertheless, if the box is damaged inspect the unit immediately for signs of damage.
EUROLIVE F1220A User Manual (7) + (8) The LINK OUTPUT is directly connected to the inputs of the F1220A and carries the input signal with no processing applied. In this way, you can route the signal to the input of another device (for example, a second F1220A). (4) (9) (10) Fig. 2.2: Equalizer Fig. 2.5: MIC/LINE INPUT (4) The F1220A features a 3-band sound control. Each band provides a maximum boost/cut of 15 dB. At center position the equalizer has a flat response.
EUROLIVE F1220A User Manual 3. Operation Connecting a signal source Use the Monitor/Aux output of a mixer to route the audio signal to the F1220A. When using the monitor mix with more loudspeakers, route the audio signal of the first F1220A to the next speaker via the LINK output. The volume level of each F1220A is adjusted with the respective LEVEL control. • Turn the LEVEL control fully to the left. • Connect the signal source to the MIC/LINE input. • Turn on the F1220A. 3.
EUROLIVE F1220A User Manual 4. Audio Connectors Both audio inputs of the BEHRINGER F1220A and the LINK OUTPUT connector are fully balanced. To maximize interference compensation, try to establish balanced connections to other equipment, whenever possible. Balanced ¼" TRS connector strain relief clamp sleeve ring tip sleeve ground/shield ring cold (-ve) tip hot (+ve) For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. Fig. 4.
EUROLIVE F1220A User Manual
We Hear You
