Quick Start Guide

ManualsBrandsBehringer ManualsActive Noise Canceling HeadphonesWireless Active Noise-Canceling Headphones with Bluetooth* Connectivity

Quick Start Guide

HC 2000BNC

Wireless Active Noise-Canceling Headphones with

Bluetooth* Connectivity

Controls

(1) ANC ON/OFF button switches the ANC (Active Noise

Cancellation) circuit on and o.

(2) FORWARD/VOLUME button can be used to increase

volume (short press), skip to the next song (long

press), or begin/end a phone call on a Bluetooth-

connected mobile phone.

(3) POWER/PLAY/PAUSE button switches the

headphones on and o (long press) and begins and

pauses audio playback (short press). Secondary call

functions include Answer Call (press) and End Call/

Reject Call (long press).

(4) BACK/VOLUME button can be used to decrease

volume (short press) or skip to the previous song

(long press).

(5) MICROPHONE can be used for talkback during

phone calls.

(6) AUX IN stereo jack can be used to listen to audio from

external devices as normal wired headphones using

audio cables with 3.5 mm stereo connectors.

(7) INDICATOR LED shows the charging status

(red = charging; blue = fully charged) as well as the

Bluetooth status (blinking blue and red = in pairing

mode; blue = connected; blinking blue = audio

playback underway).

(8) MICRO USB jack is for charging rechargeable

batteries.

(1) (7) (6) (5) (8)

(3)

(4)

(2)

Summary of content (5 pages)

PAGE 1
Quick Start Guide HC 2000BNC Wireless Active Noise-Canceling Headphones with Bluetooth* Connectivity Controls (2) (3) (4) (1) (7) (6) (5) (8) (1) ANC ON/OFF button switches the ANC (Active Noise Cancellation) circuit on and off. (5) MICROPHONE can be used for talkback during phone calls. (2) FORWARD/VOLUME button can be used to increase volume (short press), skip to the next song (long press), or begin/end a phone call on a Bluetoothconnected mobile phone.
PAGE 2
Getting started Turning the unit on/off Power Supply 1. Long press the POWER/PLAY/PAUSE button to turn ON the unit. The INDICATOR LED indicator will light on. The unit is powered by a built-in, lithium-polymer rechargeable battery. Charge the built-in battery for at least four hours before using the device for the first time. 2. Long press the POWER/PLAY/PAUSE button again turn OFF the unit. The INDICATOR LED indicator will turn off.
PAGE 3
. If the Bluetooth device prompts for a passcode, use “0000”. 4. When pairing is successful, the INDICATOR LED will light a steady blue. 5. To switch off Bluetooth, press and hold the POWER/PLAY/ PAUSE button for about 3 seconds. Some Bluetooth devices will ask you to accept and confirm the connection. If the headphones have previously been paired with a Bluetooth device, the headphones will automatically connect with that device if the device is powered on and within range.
PAGE 4
IMPORTANT SAFETY INFORMATION 4. Read these instructions. 5. Keep these instructions. 6. Heed all warnings. 7. Follow all instructions. 8. Do not use this apparatus near water. 9. Clean only with dry cloth. 10.Do not throw this product in the fire, to avoid explosion. 11. Do not expose this product to bright sunshine for a long time. 12.Do not disassemble or modify this product. 13.Please store this product in a clean and dry environment. 14.
PAGE 5
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION SUPPLIER’S DECLARATION OF CONFORMITY (SDoC) HC 2000BNC Responsible Party Name: Music Tribe Commercial NV Inc. Address: 5270 Procyon Street Las Vegas, NV 89118 USA Phone Number: +1 702 800 8290 FCC-ID: QWH-MTHP-01 HC 2000BNC This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules.