AMP800 MINIAMP User’s Manual Version 1.
MINIAMP AMP800 IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
MINIAMP MINIAMP AMP800 Ultra-Compact 4-Channel Stereo Headphone Amplifier AMP800 V 4 totally independent stereo high-power amplifier sections V Highest sonic quality with virtually all types of headphones even at maximum volume V Phones Level control plus accurate 6-digit LED output meter per channel for easy level monitoring V 2 balanced stereo main inputs with independent Level and Balance controls for individual mixes, selectable for all 4 headphone amplifiers V Accurate 6-digit LED main input met
MINIAMP AMP800 FOREWORD Dear Customer, Thank you very much for expressing your confidence in BEHRINGER products by purchasing the MINIAMP AMP800. Writing this foreword for you gives me great pleasure, because it represents the culmination of many months of hard work delivered by our engineering team to achieve a very ambitious goal: presenting four stereo amplifier sections in one compact and flexible headphone amplifier.
MINIAMP AMP800 TABLE OF CONTENTS 1. INTRODUCTION .......................................................................................... 5 1.1 Before you begin .................................................................................................................... 5 1.1.1 Shipment ....................................................................................................................... 5 1.1.2 Initial operation .....................................................................
MINIAMP AMP800 1.1.2 Initial operation Do not put the AMP800 on any equipment that generates intense heat, for example an amplifier. Ensure that the ventilation openings that are located on the top panel of the AMP800 are not covered or blocked. To power the AMP800, use only the power supply unit that is delivered with your equipment. 1.1.3 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com (alternatively www.
MINIAMP AMP800 BALANCE control: To adjust the stereo image of a signal, turn this control toward L (left) or, alternatively R (right). A + B meter: To monitor the combined level of both signals (A and B), use this meter. An LED glows next to the value that identifies the combined level (-24 dB to 0 dB). If the signal is too strong, the CLIP LED glows. Most of the time, the optimal level is 0 dB (a full signal). through (headphone) connector: To connect a headphone, use this stereo, ¼" TRS connector.
MINIAMP AMP800 LINK OUT A connectors: If you need more than the 4 Headphone Channels that a single AMP800 provides, connect these balanced, ¼" TRS connectors (Left and Right) to the inputs of another AMP800. The LINK OUT A connectors send only the signal of Input Channel A, without any LEVEL or BALANCE settings. INPUT connectors: For each Input Channel (A and B), the rear panel includes 2 balanced, ¼" TRS connectors (Left and Right). Connect them to the outputs of a mixer, a CD player, or a soundcard.
MINIAMP AMP800 4. AUDIO CONNECTIONS DEUTSCH The following provides illustrations of patch cords that include unbalanced, ¼" TS plugs and balanced, ¼" TRS plugs: Fig. 4.1: Patch cord with unbalanced, ¼" TS plugs Fig. 4.2: Patch cord with balanced, ¼" TRS plugs 4.
MINIAMP AMP800 5. SPECIFICATIONS INPUT Type ¼" TRS connector, balanced Impedance approx. 20 kΩ, balanced approx. 10 kΩ, unbalanced CMRR 40 dB typ. @ 1 kHz PHONES OUT Type ¼" TRS connector, stereo Impedance min. 100 Ω Max. output level +13 dBu @ 100 Ω load LINK OUT A Type ¼" TRS connector, balanced SYSTEM SPECIFICATIONS Frequency response 10 Hz to 120 kHz, -3 dB Dynamic range 108 dB, 10 Hz to 22 kHz (100 Ω load) Distortion 0.007 % typ.
MINIAMP AMP800 6. OTHER MINI PRODUCTS The MINIAMP belongs to the MINI suite of BEHRINGER products, which can operate together and are introduced below: MINIFEX FEX800 MINICOM COM800 Ultra-compact 9.5" stereo modeling compressor for studio and stage applications V 16 awesome preset models for the most typical compression applications (vocal, drums, guitar, keyboard, etc.
MINIAMP AMP800 7. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law.
MINIAMP AMP800 V improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals. V connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used. V damages/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. 5.