FBQ800 MINIFBQ User’s Manual Version 1.
MINIFBQ FBQ800 CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
MINIFBQ MINIFBQ FBQ800 Ultra-Compact 9-Band Graphic Equalizer with FBQ FBQ800 V Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies and can also be used as Audio Analyzer V Additional Low Cut filter removes unwanted frequencies, e. g.
MINIFBQ FBQ800 FOREWORD Dear Customer, Thank you very much for expressing your confidence in BEHRINGER products by purchasing the MINIFBQ FBQ800. Writing this foreword for you gives me great pleasure, because it represents the culmination of many months of hard work delivered by our engineering team to achieve a very ambitious goal: presenting a graphic equalizer that packs a lot of power in a compact and flexible unit.
MINIFBQ FBQ800 TABLE OF CONTENTS 1. INTRODUCTION .......................................................................................... 5 1.1 Before you begin ................................................................................................................. 1.1.1 Shipment .................................................................................................................... 1.1.2 Initial operation ...............................................................................
MINIFBQ FBQ800 1.1.2 Initial operation Please make sure the unit is provided with sufficient ventilation, and never place the FBQ800 on top of an amplifier or in the vicinity of a heater to avoid the risk of overheating. To power the FBQ800, use only the power supply unit that is delivered with your equipment. 1.1.3 Online registration Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com (alternatively www.behringer.
MINIFBQ FBQ800 2.2 Front panel DEUTSCH This section describes how to use the front panel of the FBQ800, illustrated as follows: 2.
MINIFBQ FBQ800 To monitor the input signal or, alternatively the output signal, use control elements and , as follows: METER SELECT button: To select the type of signal you want to monitor, use this button, which can appear: V pushed in and illuminated: Monitor the input signal as soon as this signal enters the FBQ800. The FBQ800 does not apply the LEVEL control or any other control elements to the input signal that you monitor.
MINIFBQ FBQ800 ), you can use control elements through to EQ the DEUTSCH If you activated all control elements ( input signal, as follows: 2.
MINIFBQ FBQ800 The following table is continued from the preceding page.
MINIFBQ FBQ800 2.3 Rear panel DEUTSCH This chapter describes what you need to know about setting up the FBQ800.
MINIFBQ FBQ800 3.
MINIFBQ FBQ800 4. AUDIO CONNECTIONS To connect audio units to the FBQ800, you can use patch cords that include the following types of plugs: V RCA (unbalanced) V ¼" TS (unbalanced) V ¼" TRS (balanced) DEUTSCH Illustrations of these plugs follow: Fig. 4.1: Patch cord with RCA plugs 4.
MINIFBQ FBQ800 5. SPECIFICATIONS INPUT Type Impedance CMRR Max. input level ¼" TRS connectors (balanced) or RCA connectors (unbalanced) approx. 20 kΩ, balanced approx. 10 kΩ, unbalanced 40 dB typ. @ 1 kHz +15 dBu OUTPUT Type Impedance Max. output level ¼" TS connecotrs (unbalanced) or RCA connectors (unbalanced) approx. 120 Ω +15 dBu SYSTEM SPECIFICATIONS Frequency response Dynamic range Distortion Crosstalk Signal-to-noise ratio 10 Hz to 200 kHz, -3 dB 110 dB, 10 Hz to 22 kHz 0.003 % typ.
MINIFBQ FBQ800 6. OTHER MINI PRODUCTS The MINIFBQ belongs to the MINI suite of BEHRINGER products, which can operate together and are introduced below: MINIFEX FEX800 Ultra-compact 9.
MINIFBQ FBQ800 7. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law.
MINIFBQ FBQ800 V connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used. V damages/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. 5. Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty. 6.
