User Manual MINIFBQ FBQ800 Ultra-Compact 9-Band Graphic Equalizer with FBQ
MINIFBQ FBQ800 User Manual Table of Contents Important Safety Instructions...............................3 Legal Disclaimer......................................................3 Limited Warranty....................................................3 1. Introduction........................................................4 1.1 Before you begin......................................................4 1.1.1 Shipment..............................................................4 1.1.2 Initial operation.........
MINIFBQ FBQ800 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twistlocking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
MINIFBQ FBQ800 User Manual 1. Introduction 1.1.3 Online registration The MINIFBQ FBQ800 was designed with our experience and knowhow in filter technology, which spans many years. Our analog and digital equalizers are used the world over in reputable radio and TV stations, studios, and PA systems. As with the rest of our product line, we put forth uncompromising demands in terms of quality for the controls, the sound, the technical data, and the fit and finish of the MINIFBQ FBQ800.
MINIFBQ FBQ800 User Manual 2.2 Front panel This section describes how to use the front panel of the FBQ800, illustrated as follows: (4) (2) (3) (5) (6) To monitor the input signal or, alternatively the output signal, use control elements (5) and (6) , as follows: (5) METER SELECT button: To select the type of signal you want to monitor, use this button, which can appear: (8) (9) (7) (1) • pushed in and illuminated: Monitor the input signal as soon as this signal enters the FBQ800.
MINIFBQ FBQ800 User Manual A. B. To monitor the output level of the FBQ800, use the METER SELECT button (5) together with the IN/OUT meter (6) , as described in this documentation. B. While you monitor the output level of the FBQ800, use the LEVEL knob (3) to adjust the output level of the FBQ800 to 0 dB. 4. If the frequency-band faders and all other control elements are not already activated, use the IN/OUT button (2) to activate them. 5.
MINIFBQ FBQ800 User Manual emphasize the sound, do one of the following: To send the output signal from the FBQ800, you can use the following types of outputs: • Slide the relevant fader up. The FBQ800 boosts the signal level in the relevant frequency band. (13) ¼" TS OUTPUT, L (left) and R (right): for TS (unbalanced) plugs • Slide the faders for the surrounding frequency bands down. The FBQ800 cuts the signal level in the surrounding frequency bands.
MINIFBQ FBQ800 User Manual 4. Audio Connections To connect audio units to the FBQ800, you can use patch cords that include the following types of plugs: • RCA (unbalanced) • ¼" TS (unbalanced) • ¼" TRS (balanced) tip hot (+ve) ring cold (-ve) sleeve ground/shield Illustrations of these plugs follow: tip tip ring tip sleeve shield sleeve sleeve strain relief clamp Fig. 4.
MINIFBQ FBQ800 User Manual 5. Specifications Input Power Supply Type ¼" TRS connectors (balanced) or RCA connectors (unbalanced) Impedance approx. 20 kΩ, balanced approx. 10 kΩ, unbalanced CMRR 40 dB typ. @ 1 kHz Max. input level +15 dBu Output Type ¼" TS connecotrs (unbalanced) or RCA connectors (unbalanced) Impedance approx. 120 Ω Max.
We Hear You