Updater 1.1.1 Release Note

ManualsBrandsBehringer ManualsAudio EquipmentDesktop Synthesizers and Sound Module

musictribe.com behringer.com

page 1 of 6

Model D Firmware

Version 1.1.1 - (19 December 2018)

Firmware Update Tools

Note: This is a software synth tool for MODEL D. The latest rmware is bundled within the application,

there is no requirement for a separate rmware le.

• Environment Requirement: Microsoft Windows 7 or above

Mac OS v10.11 or above

• Model Name: Model D

• Model Code: P0CQJ

• Firmware version: 1.1.1

Addressed Issues

1. New Synth Tool app for easier conguration of the MODEL D via the USB input.

2. Added new Mac OS support.

3. Improved the Poly Chain function to make it easier to setup and use.

4. Improved re-trigger reliability when playing with legato notes.

5. Mac version doesn’t support the rmware earlier than v1.0.5.

6. Add a function to SAVE and LOAD user setting le to the APP.

7. Fixed the notes logic issue in legato mode (multi-trigger o mode) found in the v1.1.0.

Summary of content (6 pages)

PAGE 1
Model D Firmware Version 1.1.1 - (19 December 2018) Firmware Update Tools Note: This is a software synth tool for MODEL D. The latest firmware is bundled within the application, there is no requirement for a separate firmware file. • Environment Requirement: Microsoft Windows 7 or above Mac OS v10.11 or above • Model Name: Model D • Model Code: P0CQJ • Firmware version: 1.1.1 Addressed Issues 1. New Synth Tool app for easier configuration of the MODEL D via the USB input. 2. Added new Mac OS support. 3.
PAGE 2
Introducing the New Poly Chain Now if you have multiple MODEL D units you can connect them together and easily produce polyphonic timbres and sounds. Poly Chain is no longer enabled/disabled by SysEx messages and must be configured the first time via the MODEL D Synth Tool. To enable and configure the Poly Chain mode: 1. Connect your MODEL D units together as shown in the illustration below. 2. Power on your units and start the “MODEL D Synth Tool”. musictribe.com page 2 of 6 behringer.
PAGE 3
. On the Poly Chain Tab select the total devices, voice mode (Poly, Unison, Mono) and then click “Enable”. 4. Wait for the power LED to flash four times on the first MODEL D in the chain. The units are now set in Poly Chain Mode. Poly Chain mode is persistent over power cycling. To disable Poly Chain mode, connect all devices as previously and in the “MODEL D Synth Tool” click disable. Or Switch the “A440” switch 4 times within the first 5 seconds after power up to disable the Poly Chain.
PAGE 4
Poly Chain Information: The new Poly Chain feature supports up to 16 MODEL D’s at once. Here are some examples of how the new Poly Chain feature works: Total Device Select the total number of MODEL D’s to be used in the Poly Chain. Selecting above the total number of units connected will lead to unknown behaviour and is best avoided. Selecting below the total number of units connected will lead to the extra units on the Poly Chain being ignored. Voice Mode Select the Poly Chain voice mode.
PAGE 5
VOICE MODES There are currently 3 types of voice mode to select from. VOICE MODE - POLY (4 Devices) Single Notes: Playing single notes will play via a different unit each time. The order in which unit’s play is random. Chords: It is possible to play chords in Poly Chain mode. Each note will be assigned to the next MODEL-D in the chain, if there is not enough MODEL-D’s connected to complete the chord a last note priority is applied to the notes. musictribe.com page 5 of 6 behringer.
PAGE 6
VOICE MODE - Unison-2 (4 Devices) This is like the Poly Mode but instead two units are assigned to each note. VOICE MODE - MONO (4 Devices) This option allows the user to select the number of units that will play when a note is triggered. The note priority can be set in this mode, the options are High, Low and Last note priority modes. © Music Tribe Global Brands Ltd. All rights reserved. All information in this document is subject to change without any further notice. musictribe.