User Manual
9 MODEL D User Manual
3.1.3 Oscillator Bank Section
(13) OSC 3 CONTROL - when ON, the frequency of OSC 3 will vary with the
keyboard. When OFF, the keyboard, Pitch wheel, and Modulation wheel,
will have no eect on OSC 3.
(14) FREQUENCY RANGE - select from six frequency ranges of Oscillator
1, 2, or 3.
(15) FREQUENCY ADJUSTMENT - adjust the frequency of Oscillator 2 or 3.
(16) WAVE SHAPE - select the wave shape of Oscillator 1, 2, or 3 from:
triangular, triangular/ sawtooth (OSC1 and 2), reverse sawtooth (OSC3),
sawtooth, square, medium pulse, and narrow pulse.
(17) MOD SOURCE (INPUT) - allows connection of an external modulation
source. If nothing is connected here, then the internal Noise generator is
available as a modulation source.
(18) OSC 1V/OCT (INPUT) - this input allows the frequency of the three
oscillators to be adjusted by an external control voltage (1 Volt input
increase, will increase the frequency by one Octave).
(19) LFO CV (INPUT) - allows control of the LFO frequency by an external
control voltage.
(1)
(6)
(7)
(36)
(47)
(46)
(35)
(34)
(8)
(9)
(5)
(33)
(32)
(44)
(42)
(45)
(43)
(31)
(30)
(4)
(2) (3)
(17)
(10) (11) (12)
(13) (14) (15) (16)
(20) (21) (22)
(24)
(25)
(23)
(18)
(26) (27)
(37) (38) (39) (40)
(41)
(48)
(49)
(28) (29)
(19)
3.1.4 Mixer Section
(20) VOLUME - adjust the volume of Oscillator 1, 2, or 3.
(21) ON/OFF - select the sources to play from OSC1, OSC2, OSC3, Noise, and
External Input, or any combination of these 5 sources.
(22) NOISE VOLUME - adjust the level of the internal Noise source.
(23) WHITE/PINK - switch the internal Noise source from Pink noise to White
noise.
(24) OVERLOAD - indicates when the audio levels of the mix are overloading
the mixer section.
(25) EXT IN VOLUME - adjust the level of any external source playing into the
External Input. If nothing is connected to the external input, then the main
output is connected here and can be adjusted by this volume knob.
(26) LFO Triangular (OUTPUT) - outputs the internal LFO triangular-wave
signal.
(27) LFO Square (OUTPUT) - outputs the internal LFO square-wave signal.
(28) EXT (INPUT) - connect any external line-level audio source to this 3.5
mm input. If nothing is connected here, then the main audio output is
internally connected to this external input.
(29) MIX (OUTPUT) - outputs the nal mix from this Mixer section.
(1)
(6)
(7)
(36)
(47)
(46)
(35)
(34)
(8)
(9)
(5)
(33)
(32)
(44)
(42)
(45)
(43)
(31)
(30)
(4)
(2) (3) (17)
(10) (11) (12) (13) (14) (15) (16)
(20) (21) (22)
(24)
(25)
(23)
(18)
(26) (27)
(37) (38) (39) (40)
(41)
(48)
(49)
(28) (29)
(19)