Version 1.0 November 2002 POWERPLAY PRO-XL HA4700 POWERPLAY PRO-8 HA8000 www.behringer.
POWERPLAY PRO-XL HA4700/PRO-8 HA8000 SAFETY PRECAUTIONS DETAILED SAFETY INSTRUCTIONS: All the safety and operation instructions should be read before the device is operated. Retain Instructions: The safety and operating instructions should be retained for future reference. Heed Warnings: All warnings on the device and in the operating instructions should be adhered to. CAUTION: To reduce the risk of electric shock, do not remove the cover (or back).
POWERPLAY PRO-XL HA4700/PRO-8 HA8000 TABLE OF CONTENTS FOREWORD Dear Customer, welcome to the team of BEHRINGER users, and thank you very much for expressing your confidence in us by purchasing the POWERPLAY PRO. Writing this foreword for you gives me great pleasure, because it represents the culmination of many months of hard work delivered by our engineering team to achieve a very ambitious goal: to present two outstanding pieces of equipment, whose flexibility lets them find use in both studios and P.A.
POWERPLAY PRO-XL HA4700/PRO-8 HA8000 1.1.1 Initial operation 2.1 Front panel Please make sure the unit is provided with sufficient ventilation, and never place the POWERPLAY PRO on top of an amplifier or in the vicinity of a heater to avoid the risk of overheating. + Before plugging the unit into a power socket, please make sure you have selected the correct voltage: The fuse compartment near the power plug socket contains three triangular markings. Two of these triangles are opposite one another.
POWERPLAY PRO-XL HA4700/PRO-8 HA8000 The TREBLE control (HA4700 only) attenuates or boosts the high frequency portion of the signal (+/-12 dB). The L MUTE and R MUTE switches allow you to mute the respective input signal, so that only the remaining input signal is audible (HA4700 only). The PHONES OUT connector is connected in parallel to the output connectors located on the rear, presenting an easily accessible additional monitor option for individual channels.
POWERPLAY PRO-XL HA4700/PRO-8 HA8000 This way, you can for example effortlessly record vocals and feed in an already existing playback using your POWERPLAY PRO-XL HA4700. The playback signal is fed through the MAIN IN inputs, and the preamplified vocal signal is fed into the AUX IN connector. The respective BALANCE control should be set up in such a way that the singer gets a perfectly matched mix between the playback and the vocals, whereby the OUTPUT LEVEL control regulates the overall volume. 3.
POWERPLAY PRO-XL HA4700/PRO-8 HA8000 Fig. 4.4: 1/4" TRS connector for headphones operation + Please assure that the unit is installed and operated only by people with an understanding of the units functions. During and after the installation always make sure that those handling the unit are themselves properly grounded. Failure to do so may cause undesirable or faulty operation through electrostatic discharge. 5.
POWERPLAY PRO-XL HA4700/PRO-8 HA8000 )81&7,21 &21752/6 32:(53/$< 352 ;/ +$ variable Input Level Balance per channel 32:(53/$< 352 +$ mix between Aux and Main signals / balance between right and left channel - variable Output Level per channel Treble cutoff frequency: 6 kHz; range +/- 12 dB - Bass cutoff frequency: 200 Hz, range +/- 12 dB - switches between stereo mode and 2-channel mode - - switches between MAIN Input 1 and MAIN Input 2 Left Mute mutes the left signal of the resp
POWERPLAY PRO-XL HA4700/PRO-8 HA8000 6. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.