Quick Start Guide ULTRALINK PRO MX882 Ultra-Flexible 8-Channel Splitter/Mixer
ULTRALINK PRO MX882 Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
4 ULTRALINK PRO MX882 Consignes de sécurité Les points repérés par ce symbole portent une tension électrique suffisante pour constituer un risque d’électrocution. Utilisez uniquement des câbles d’enceintes professionnels de haute qualité avec fiches Jack mono 6,35 mm ou fiches à verrouillages déjà installées. Toute autre installation ou modification doit être effectuée uniquement par un personnel qualifié.
6 ULTRALINK PRO MX882 Instruções de Segurança Importantes Aviso! Terminais marcados com o símbolo carregam corrente elétrica de magnitude suficiente para constituir um risco de choque elétrico. Use apenas cabos de alto-falantes de alta qualidade com plugues TS de ¼" ou plugues com trava de torção pré-instalados. Todas as outras instalações e modificações devem ser efetuadas por pessoas qualificadas.
8 ULTRALINK PRO MX882 9 Quick Start Guide ULTRALINK PRO MX882 Controls (EN) Controls (5) (2) (1) (3) (4) (8) (6) (7) (9) (10) (15) (14) (13) (12) (1) The MAIN INPUT LEVEL control sets the main input gain, before the signal reaches the input bus. In SPLIT mode, the MAIN INPUT LEVEL control determines the common output level for all mono outputs. (2) The 4-digit INPUT LEVEL meter informs you about the input level of the main input within a range from -24 to +6 dB.
10 ULTRALINK PRO MX882 11 Quick Start Guide ULTRALINK PRO MX882 Controls (ES) Controles (1) Con el control MAIN INPUT LEVEL se determina la amplificación de la etapa principal de entrada antes de que la señal alcance la barra selectora de entrada (bus de entrada). El control MAIN INPUT LEVEL determina conjuntamente en el modo SPLIT el nivel de salida para cada una de las salidas.
12 ULTRALINK PRO MX882 13 Quick Start Guide ULTRALINK PRO MX882 Controls (DE) Regler (1) Mit dem MAIN INPUT LEVEL-Regler wird die Verstärkung der Haupteingangsstufe bestimmt, bevor das Signal auf den Eingangsbus gelangt. Im SPLIT-Modus bestimmt der MAIN INPUT LEVEL-Regler den Ausgangspegel für alle Einzelausgänge gemeinsam. (2) Diese 4-stellige INPUT LEVEL-Anzeige informiert Sie über den Eingangspegel des Main-Eingangs und stellt diesen im Bereich von -24 bis +6 dB dar.
14 ULTRALINK PRO MX882 Quick Start Guide Other important information Specifications Audio Inputs Connectors Type Impedance Nominal operating level Max. input level CMRR XLR and ¼" TRS RF-filtered, servo-balanced input 40 kΩ balanced, 20 kΩ unbalanced -10 dBV to +4 dBu +21 dBu, balanced and unbalanced Typically >55 dB @ 1 kHz Audio Outputs Connectors Type Impedance Max.
16 ULTRALINK PRO MX882 Quick Start Guide FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION ULTRALINK PRO MX882 Responsible Party Name: MUSIC Group Services NV Inc. Address: 5270 Procyon Street Las Vegas, NV 89118 USA Phone Number: +1 702 800 8290 ULTRALINK PRO MX882 complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Dedicate Your Life to MUSIC
