Brochure

Our light-as-a-feather iNUKE power
amps have been wildly successful,
and we’ve sold truckloads of them all
over the world! Why? Because they
are ultra-dependable, put out massive
amounts of power, yet weigh so very
little thanks to our revolutionary high-
density Class-D technology and ultra-
ecient switch-mode power supplies.
But we think we may have outdone
ourselves with the new iNUKE NU12000,
which packs a whopping 12,000-Watt total
output! Yes, that’s right – a stereo power
amplier with 6,000 Watts output per
channel @ 2 Ohms, or 2 x 3,400 Watts @
4 Ohms – and it weighs less than 26.5 lbs. /
12 kg. This groundbreaking amplier is also
available in a USB-addressable DSP version,
the iNUKE NU12000DSP.
Superb transient response
We spent years ne-tuning the
high-density Class-D technology that
gives the iNUKE Series its oomph.
By carefully selecting transistors with
extremely high slew rates and optimizing
other proprietary parts of our circuitry,
these amps react instantly to even the
most demanding bass impulses.
When this amazing amplier
technology is combined with our
state-of-the-art switching-mode power
supplies, these ampliers provide
tremendous punch. And because they are
so much more ecient than conventional
designs, they run cooler and don’t require
the massive heat sinks and heavy toroid
transformers typically associated with
their conventional counterparts.
Sublimely simple operation
The front panel controls and indicators
provide your system’s vital signs at a
glance. After pressing the Power button,
the Power LED lights to show the amp
is ready for action. All channels feature
positive-detent Gain controls with Signal
LEDs that light when a signal is present,
as well as clip LEDs to indicate when the
signal is distorted and you need to reduce
the input signal.
NU12000DSP
Ultra-Lightweight, High-Density
12000-Watt Power Amplier with
DSP Control and USB Interface
Delivers 2 x 6000 Watts into 2 Ohms,
2 x 3000 Watts into 4 Ohms and
weighs less than 26.5 lbs / 12 kg
iNUKE NU6000DSP—
Ultra-Lightweight, High-Density
6000-Watt Power Amplier with
DSP Control and USB Interface
Delivers 2 x 3100 Watts into 4 Ohms,
2 x 1600 Watts into 8 Ohms and
weighs less than 12 lbs / 5.5 kg
iNUKE NU3000DSP—
Ultra-Lightweight, High-Density
3000-Watt Power Amplier with
DSP Control and USB Interface
Delivers 2 x 1500 Watts into 2 Ohms;
2 x 900 Watts into 4 Ohms;
3000 Watts into 4 Ohms
(bridge mode) and weighs less
than 8 lbs / 3.5 kg
iNUKE NU1000DSP —
Ultra-Lightweight, High-Density
1000-Watt Power Amplier with DSP
Control and USB Interface
Delivers 2 x 500 Watts into 2 Ohms;
2 x 300 Watts into 4 Ohms;
1000 Watts into 4 Ohms
(bridge mode) and weighs less
than 8 lbs / 3.5 kg
Common features
Ultimate reliability through
revolutionary cool-running
High-Density Class-D technology
with “near-zero” thermal buildup
Ultra-ecient switch-mode power
supply for noise-free audio,
superior transient response and
low power consumption
Continued on next page
iNUKE NU12000DSP/NU6000DSP/
NU3000DSP/NU1000DSP/NU12000/
NU6000/NU3000/NU1000
PA Ampliers