Quick Start Guide

12 PK112 A / P K115A Quick Start Guide 13
PK112A/PK115A Controls
(EN)
Step 1: Controls
(1) SD/MMC slot allows you to play back digital
audio les stored on SD (Secure Digital) or
MMC (MultiMedia Card) ash memory cards.
(2) LED DISPLAY shows the current le and
playback settings.
(3) USB input allows you to play back audio les
stored on a USB stick.
(4) INFRARED RECEIVER connects to the
remote control.
(5) DIGITAL MEDIA PLAYER for USB and SD/MMC
oers the following playback controls:
A. PLAY/PAUSE: Press to play,
pause or search.
B. STOP PLAYBACK: Press to stop
audio playback.
C. VOLUME UP: Press to increase the
MP3 playback volume.
D. VOLUME DOWN: Press to decrease the
MP3 playback volume.
E. BACK: Press once to move to the previous
song or folder.
F. FORWARD: Press once to move to the next
song or folder.
G. REPEAT: Press to select between One,
Random, Folder or All repeat modes.
H. EQ: Press to activate the EQ function
and choose between EQ presets: Normal
(NOR), Pop (POP), Rock (ROC), Jazz (JAZ),
Classical (CLA) and Country (CUN).
I. MODE: Press to choose between the
USB jack or SD/MMC/BLUETOOTH slot as
the source for MP3 playback.
(6) MIC 1/2 jacks accept audio signals from
devices using cables using XLR, balanced ¼"
TRS or unbalanced ¼" TS connectors.
(7) MIC 1/2 knobs control the input level for the
MIC 1/2 jacks.
(8) LINE/MP3 knob controls the volume level for
the LINE IN signal and the MP3 signal.
(9) MASTER level control adjusts the nal
speaker volume.
(10) MP3/LINE switch toggles between the MP3
player or LINE IN audio sources.
(11) PWR LED lights up when the audio system is
connected to power and switched on.
(12) CLIP LED lights up to indicate the internal
limiter is responding to signal peaks.
(13) TREBLE knob adjusts the level of treble
frequencies for the speaker unit.
(14) BASS knob adjusts the level of bass
frequencies for the speaker unit.
(15) LINE OUT connections send out an
unbalanced stereo signal to external devices
using audio cables with RCA connectors.
(16) LINE IN connections accept unbalanced stereo
signals from external devices using audio
cables with RCA connectors.
(17) EXTENSION OUTPUT allows you to connect
and drive an additional speaker cabinet (min.
8  total load) using speaker cables with
professional twist-locking connectors.
(18) POWER switch turns the unit on and o.
! Before turning on the audio system, all
level controls must be set to minimum. Once the
system is turned on, slowly increase input levels to
help prevent damage to the speaker and amplier.
(19) AC INPUT socket accepts the included
IEC power cable.
Remote Control
(1) STOP button turns the Digital Media Player
on and o.
(2) MODE button switches between USB and SD/
MMC/Bluetooth as the source for playback.
(3) MUTE button mutes the sound.
(4) BACK button skips back to the previous track.
(5) FORWARD button skips ahead to the
next track.
(6) PLAY/PAUSE button starts and stops playback
of audio les.
(7) VOL- button decreases the volume
when pressed.
(8) VOL+ button increases the volume
when pressed.
(9) EQ button activates the EQ function and
chooses between EQ presets: Normal (NOR),
Pop (POP), Rock (ROC), Jazz (JAZ), Classical
(CLA) and Country (CUN).
(10) 100+ button jumps ahead by 100 tracks.
(11) 200+ button jumps ahead by 200 tracks.
(12) NUMERIC KEYPAD allows you to enter values
for various functions.
A B C D E F G H I
(1)(2) (3)
(4)
(6)
(7)
(5)
(8)
(9)
(15)
(18)
(19)
(13)
(10)
(11)
(12)
(16)
(17)
(14)
(1)
(2)
(3)
(5)
(6)
(8)
(9)
(4)
(7)
(12)
(10)
(11)