User Manual

20 EUROPOWER PMP6000/PMP4000/PMP1000 User Manual
Preamp Outputs
MAIN
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu
Monitor
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu
Stereo Outputs
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. input level +21 dBu
Type RCA
Impedance approx. 1 kOhm
Max. input level +21 dBu
Loudspeaker Outputs
Type Professional locking connector
Load Impedance:
MAIN L/R 4 - 8 Ohm
MONITOR/MAIN MONO 4 - 8 Ohm
MAIN MONO/MAIN MONO 4 - 8 Ohm
BRIDGE 8 - 16 Ohm
DSP
Converter 24-bit Delta-Sigma,
64/128-times oversampling
Dynamics D/A 90 dB
Sampling rate 46.875 kHz
Delay Time max. 5 secs
Signal run time approx. 1.5 ms (Line In > Line Out)
Display
Type 2-digit, 7 segment LED
Output Power
RMS @ 1% THD, Both Channels Driven:
8 Ohm per channel 300 W
4 Ohm per channel 600 W
RMS @ 1% THD, Bridged Mode:
8 Ohm 1200 W
Peak Power, Both Channels Driven:
8 Ohm per channel 400 W
4 Ohm per channel 800 W
Peak Power, Bridged Mode:
8 Ohm 1,600 W
Power Supply
Mains Voltage
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50/60 Hz
Europe/Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Fuse 100 - 120 V~ T 10 A H 250 V
Fuse 220 - 240 V~ T 6.3 A H 250 V
Power Consumption
Power consumption 1,050 W
Mains connector IEC standard receptacle
Dimensions/Weight
Dimensions (H x W x D) 4.8 x 18.1 x 18.7"
122 x 460 x 476 mm
Weight 22.9 lbs / 10.4 kg