Version 1.
EUROPOWER PMH2000 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
EUROPOWER PMH2000 FOREWORD Dear Customer, Welcome to the team of EUROPOWER users and thank you very much for expressing your confidence in BEHRINGER products by purchasing the BEHRINGER PMH2000.
EUROPOWER PMH2000 1. INTRODUCTION 2. CONTROL ELEMENTS Congratulations! With the PMH2000 you have acquired a state-of-the-art 10-channel power mixer that sets new standards. Right from the start, our goal has been to design a revolutionary device that can be used for a great variety of applications. And indeed, this overwhelming power mixer gives you plenty of functionality and a broad range of connection and expansion options.
EUROPOWER PMH2000 s s The stereo equalizer is effective on the main mix when both units have been activated with the EQ IN buttons and the MODE switch is set to its upper position (LEFT/RIGHT). 2.2 Rear panel The mains connection is on a standard IEC receptacle. An appropriate power cord is supplied with the unit. FUSE HOLDER. Before connecting the unit to the mains, ensure that the voltage setting matches your local voltage. Blown fuses should only be replaced by fuses of the same type and rating.
EUROPOWER PMH2000 Cathedral: Simulates the dense, long reverberation of a large cathedral, which is appropriate for solo instruments or vocals in slow pieces. Please choose between two variations. Delay: A delay of the input signal with various repetitions. Different tempo settings (ten variations in total) allow interesting delay effects. Plate: Simulates the sound of plate reverberators and hence is a classic for drums (snare) and vocals.
EUROPOWER PMH2000 4. INSTALLATION 4.1 Mains voltage Before connecting the PMH2000 to the mains, please carefully check that your equipment is set to the correct voltage! Blown fuses must be replaced by fuses of the same type and rating! 4.2 Mains connection The mains connection is made using the enclosed power cord and a standard IEC receptacle. It meets all of the international safety certification requirements. + Fig. 4.3: XLR connectors Please make sure that all units have a proper ground connection.
EUROPOWER PMH2000 Fig. 4.6: PMH2000 loudspeaker connector assignment 5. WIRING EXAMPLES Fig. 5.2: PMH2000 as double mono amplifier (example) + For this application, however, please set the MODE to MON/MAIN! switch Fig. 5.1: PMH2000 as stereo amplifier (example) + 8 Please set the MODE switch for this application! to LEFT/RIGHT Fig. 5.3: Standard setup (example) 5.
EUROPOWER PMH2000 6. SPECIFICATIONS Mono inputs Microphone inputs Type Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance @ 50 Ω source resistance @ 150 Ω source resistance XLR, electronically balanced, discrete input circuit -122 dB / 125 dB A-weighted -122 dB / 125 dB A-weighted -121 dB / 124 dB A-weighted Frequency response <10 Hz - 100 kHz (-1 dB), <10 Hz - >200 kHz (-3 dB) Gain Max. input level Impedance +33 dB, +8 dB with pad +12 dBu @ +8 dB gain approx. 2.2 kΩ balanced / 1.
EUROPOWER PMH2000 7. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
