PMH518M EUROPOWER User’s Manual Version 1.
EUROPOWER PMH518M IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
EUROPOWER PMH518M EUROPOWER Ultra-Compact 180-Watt 5-Channel Powered Mixer with 24-Bit Multi-FX Processor and FBQ Feedback Detection System PMH518M V Super-compact rackmountable 180-Watt powered mixer with 24-bit FX processor V Revolutionary amplifier technology: enormous power, incredible sonic performance and super-light weight V Ultra-compact dimensions at nearly half the depth and weight of conventional powered mixers means no more lugging around dead weight V Ultra low-noise ULN design for highest
EUROPOWER PMH518M FOREWORD Dear Customer, Welcome to the team of EUROPOWER users and thank you very much for expressing your confidence in BEHRINGER products by purchasing this power mixer.
EUROPOWER PMH518M 1.1.3 Online registration 1. INTRODUCTION Congratulations! With the PMH518M you have acquired a stateof-the-art power mixer that sets new standards. Right from the very start it has been our goal to design a revolutionary unit that can be used for a wide variety of applications. And indeed, this overwhelming power mixer gives you plenty of functionality and a broad range of connection and expansion options. 1.1 Before you get started 1.1.
EUROPOWER PMH518M 2. CONTROL ELEMENTS Fig. 2.1: Front panel control elements and connectors Press the FBQ IN switch to activate the FBQ Feedback Detection System. The frequencies causing feedback are shown by the brightly lit fader LEDs. Simply lower the level of the respective frequency range until feedback disappears and the LED goes out. 2.1 Input channels The HIGH control in the EQ section governs the highfrequency range of the respective channel.
EUROPOWER PMH518M Fig. 2.2: Rear panel control elements and connectors 2.4 Rear panel 4. INSTALLATION The mains connection is on a standard IEC receptacle. An appropriate power cord is supplied with the unit. FUSE HOLDER. Before connecting the unit to the mains, ensure that the voltage setting matches your local voltage. Blown fuses should only be replaced by fuses of the same type and rating. Please also read the information given in chapter 6 “SPECIFICATIONS”.
EUROPOWER PMH518M Please be sure to only use commercial Speakon® cables (type NL4FC) for connecting your loudspeakers to the mixer. Please check the pin connections of your loudspeakers and cables depending on the EUROPOWER speaker output you choose. EUROPOWER PMH518M OUTPUT 1+ 1- 2+ 2- MAIN MONO POS NEG POS NEG Tab. 4.1: Pin connections of the professional loudspeaker connector 5. APPLICATIONS Fig. 4.
EUROPOWER PMH518M The following illustration shows a live application with the PMH518M as monitor mixer and a BEHRINGER EURODESK SL2442FX-PRO that provides the FOH main mix signal. The PMH518M receives the Aux Send signal of the EURODESK that is used for the monitor mix on stage. 6. SPECIFICATIONS MICROPHONE INPUTS Type Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance @ 50 Ω source resistance @ 150 Ω source resistance Frequency response Gain Max.
EUROPOWER PMH518M 7. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law. 2.
