User's Manual

Preamplier/Volume Booster
Thank you for showing your condence in us by purchasing the BEHRINGER PREAMP BOOSTER PB100.
This high-quality eects pedal can be used to boost the volume and shape the sound of any instrument.
Thanks to its high-performance features you will be able to match Piezo pickups to regular amp inputs or
boost volume while playing solo parts.
1. Controls
(1) The BASS control allows you to adjust the low-frequency range of the signal.
(2) The TREBLE control allows you to adjust the high-frequency range of the signal.
(3) The GAIN control adjusts the amount of preamplication.
(4) The ON/BATT LED illuminates when the eect is activated. It also serves as a
battery level indicator.
(5) Use the footswitch to activate/deactivate the eect.
(6) Use this ¼" TS IN connector to plug in the instrument cable.
(7) The ¼" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
◊ The PB100 has no on/o switch. As soon as you insert the jack into the in connector,
the PB100 begins running. When not using the PB100, remove the jack from the
in connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
(1)
(7)
(3)
(2)
(4)
(5)
(6)
PREAMP/BOOSTER PB100