Version 1.
EURORACK PRO RX1602 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
EURORACK PRO RX1602 EURORACK PRO Professional multi-purpose 16-input ultra low-noise line mixer RX1602 s Extremely flexible keyboard and multi-purpose sub-mixer, multi-track monitoring mixer, level translator, FX return sub-mixer etc.
EURORACK PRO RX1602 TABLE OF CONTENTS FOREWORD Dear Customer, welcome to the team of BEHRINGER users, and thank you very much for expressing your confidence in us by purchasing the RX1602. Writing this foreword for you gives me great pleasure, because it represents the culmination of many months of hard work delivered by our engineering team to achieve a very ambitious goal: to develop a robust rack mixer with outstanding sound quality, all utilitzing the smallest amount of space possible.
EURORACK PRO RX1602 1.1 Before you get started 2. CONTROL ELEMENTS AND CONNECTIONS 1.1.1 Shipment The RX1602 was carefully packed at the factory to assure secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage. + In this chapter we go about describing all control elements of your EURORACK PRO RX1602. All controls and connectors will be explained in full detail.
EURORACK PRO RX1602 Use the OPERATING LEVEL switch located on the rear of your RX1602 to individually adjust each channel to the output signal level of your equipment. When the switch is depressed (-10 dBV), the inputs are more sensitive. The LEVEL control in the MAIN section governs the volume level of your headphones. Please connect your headphones to the PHONES connector. It is a standard 1/4" TRS stereo connector. These are the inputs of the channel sections on balanced 1/4" TRS connectors.
EURORACK PRO RX1602 FUSE COMPARTMENT/VOLTAGE SELECTION: Before plugging the unit into a power socket, please make sure you have selected the correct voltage. Faulty fuses must be replaced with fuses of appropriate rating without exception. Some units feature a fuse compartment that can be operated in two different positions, allowing alternating between 230 V and 120 V. Attention: when using the unit outside of Europe (running on 120 V), you have to implement a fuse with a higher rating. 3.
EURORACK PRO RX1602 3.3 Monitoring multi-track recorders 3.4 Small live setup Professional sound cards and multi-track recorders can replay several tracks simultaneously. For this purpose, your RX1602 can be ideally used as a space-saving monitor mixer. Compact and powerful, feature-rich equipment is optimal for musicians who spend a lot of their time on the road. Fig. 3.
EURORACK PRO RX1602 4.2 Audio connections You will require several types of cables for the various kinds of connections possible. The following illustrations show you how to wire different cables. Always use high-quality cables. The audio inputs of the RX1602 are electronically balanced to avoid hum problems. Of course, you can also connect equipment featuring unbalanced outputs.
EURORACK PRO RX1602 6. SPECIFICATIONS AUDIO INPUTS INPUT L/R Type Impedance Gain range Operating level Max. input level Common-mode rejection CMRR @ 1 kHz AUDIO OUTPUTS MAIN OUT L/R Type Gain range Impedance Max. output level MON OUT Type 1/4" TRS connector, electronically balanced approx. 20 kΩ balanced, 10 kΩ unbalanced -οο to +15 dB variable, +4 dBu/-10 dBV (switchable) +22 dBu typ. 44 dB 1/4" TRS connector, unbalanced -οο to +15 dB approx. 120 Ω +22 dBu Impedance Max.
EURORACK PRO RX1602 7. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
