Version 1.0 July 2001 www.behringer.
PRO MIXER VMX100 This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Read the manual.
PRO MIXER VMX100 FOREWORD Dear Customer, Welcome to the team of PRO MIXER users and thank you for demonstrating your faith in us by purchasing the BEHRINGER VMX100. Writing this foreword to you is an extremely pleasant task. After several months of intensive brainstorming and the subsequent realization of their ideas, our engineers finally achieved an ambitious goal: the construction of an outstanding DJ MIXER, which, due to its remarkable functions, provides maximum flexibility and impressive performance.
PRO MIXER VMX100 PRO MIXER Professional 2-channel ultra low-noise DJ mixer s Super-smooth Ultraglide faders with up to 500,000 life cycles s Crossfader curve control s Gain and 2-band kill EQ (-32 dB) per channel s Extremely precise assignable level meter with peak hold function VMX100 s Intelligent dual auto-BPM counter with time and beat sync display s Extremely low-noise ULN-(Ultra-Low Noise) design, like those on professional studio consoles s Gold-plated cinch sockets for excellent audio quali
PRO MIXER VMX100 TABLE OF CONTENTS 1. INTRODUCTION..................................................................................................................... 5 1.1 Before you get started ..................................................................................................................... 5 2. FRONT PANEL ........................................................................................................................ 6 2.1 2.2 2.3 2.4 2.5 Input channels 1 and 2 ...........
PRO MIXER VMX100 2. FRONT PANEL 6 2.
PRO MIXER VMX100 + 2 + Never connect line-level equipment to the highly sensitive phono inputs! The output levels of phono cartridge systems are in the millivolt range, whereas CD and MD players, as well as tape decks, provide outputs levels in the volt range. In other words, the level of line signals is up to 100 times higher than phono output levels. The GAIN control is used to adjust the input signal level. The overall level of your signal is also effected by the EQ settings.
PRO MIXER VMX100 synchronization of channel 1 and 2 is shown in the TIME OFFSET LED display ( ) below the TEMPO DIFFERENCE display. When the center LED is lit, the tracks are in sync with each other. When the display moves to the left or right, the corresponding channel is running out of sync. The TEMPO DIFFERENCE and TIME OFFSET displays are only active when the tempi of both channels have been locked as explained above.
PRO MIXER VMX100 22 The GND connection allows grounding of a turntable. 23 Use the AMP output to connect the VMX100 to an amplifier. The level is controlled by the MAIN knob in the MIC/MAIN section. + In order to avoid power-up thumps, which can damage your loudspeakers, please power up your amplifier last. There should be no signal present, e.g. no music playing, when you turn on your amp.
PRO MIXER VMX100 4. SPECIFICATIONS AUDIO INPUTS Mic input Phono inputs 1 and 2 Line inputs 1 and 2 53 dB gain, servo-balanced 40 dB gain @ 1 kHz, unbalanced 0 dB gain, unbalanced AUDIO OUTPUTS Main Out Tape Out Headphones max.
PRO MIXER VMX100 5. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
