Version 1.0 March 2001 ® SUPER-X PRO www.behringer.
SUPER-X PRO CX2310 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock.
SUPER-X PRO CX2310 FOREWORD Dear Customer, Welcome to the team of SUPER-X PRO users and many thanks for the confidence that you have shown in us by purchasing the CX2310. It is one of my most pleasant tasks to write this letter to you, because after many months of hard work our engineers have achieved a very ambitious goal: to present a top-quality piece of equipment which thanks to its flexibility can be used in both live and studio surroundings.
SUPER-X PRO CX2310 TABLE OF CONTENTS 1. INTRODUCTION..................................................................................................................... 5 1.1 Before you begin ............................................................................................................................. 5 2. CONTROL ELEMENTS ......................................................................................................... 6 2.1 Stereo 2-way operation with separate subwoofer signal ...
+ SUPER-X PRO CX2310 If the unit is damaged, please do not return it to us, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted. Shipping claims must be made by the consignee. Be sure that there is enough space around the unit for cooling and please do not place the SUPER-X PRO on high-temperature devices such as power amplifiers, etc. to avoid overheating.
SUPER-X PRO CX2310 1 INPUT control. This control adjusts the input gain over the range from -12 to +12 dB. 2 LOW CUT switch. This switch activates the 25 Hz high-pass filter. It has a side gradient of 12 dB/octave and is used to protect your bass loudspeaker. 3 LOW/HIGH XOVER FREQ. control. This control governs the crossover frequency between the low and high bands. 4 LOW OUTPUT control. Controls the output level of the low band over the range from -6 to +6 dB. 5 LOW PHASE INVERT switch.
SUPER-X PRO CX2310 2.2 Mono 3-way operation with separate subwoofer signal First activate mono 3-way mode using the MODE switch on the rear panel (switch released). The MONO LED on the front panel above the LOW CUT switch lights up. Then the LEDs above the active control on the front panel light up. They show which controls are active for the mode of operation, which you have selected. The text on the first label shows the functions of these controls. 8 2.
SUPER-X PRO CX2310 3.
+ SUPER-X PRO CX2310 BEHRINGER accepts no responsibility for any damage or destruction of loudspeakers arising from improper or incorrect use of the SUPER-X PRO and in particular from actions which are in contravention with the clearly stated procedures given in this manual. 3.2 Setting the input and output levels Both inputs offer a gain or loss of up to 12 dB. Normally, the output level on the mixing console and the input sensitivity of the amplifiers are identical, i.e.
SUPER-X PRO CX2310 3.5 SUBWOOFER Output To achieve a very loud and deep bass playback the SUPER-X PRO has an additional mono subwoofer output for 2-way and 3-way operation. In this sense the CX2310 is a stereo 2-way + mono 1-way or mono 4-way frequency crossover. The subwoofer signal is mono, since people cannot sense the location of lower frequencies. Another reason is that combining all bass signals into a single signal produces an excellent effect.
SUPER-X PRO CX2310 5. SPECIFICATIONS INPUTS Connectors Type Impedance Max. Input level CMRR XLR Electronically servo-balanced, HF filtered balanced >50 kOhm, unbalanced >25 kOhm +22 dBu typical, balanced or unbalanced >40 dB, typical >55 dB at 1 kHz OUTPUTS Connectors Type Impedance Max.
SUPER-X PRO CX2310 6. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
