User Manual SUPER-X PRO CX2310 High-Precision Stereo 2-Way/Mono 3-Way Crossover with Subwoofer Output
SUPER-X PRO CX2310 User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited warranty............................................................. 3 1. Introduction................................................................ 4 1.1 Before you begin ........................................
SUPER-X PRO CX2310 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
SUPER-X PRO CX2310 User Manual 1. Introduction If you want to operate a loudspeaker system, which consists of several loudspeakers covering different frequency bands, then you naturally have to work with suitably differentiated input signals for each loudspeaker. To do this you need a frequency crossover which can split the input signal into several frequency bands.
SUPER-X PRO CX2310 User Manual (INPUT) (CLIP) (LOW CUT) (LOW/MID) (LOW OUTPUT) (INPUT) (CLIP) (LOW CUT) (LOW/HIGH) (LOW OUTPUT) (HIGH OUTPUT) (1) (2) (3) (MID/HIGH) (MID OUTPUT) (HIGH OUTPUT) (INPUT) (CLIP) (LOW CUT) (LOW/HIGH) (LOW OUTPUT) (HIGH OUTPUT) (4) (6)(5)(7) (9)(8) (10) (11) (13) (12) Fig. 2.1: Active control elements on the front panel of the SUPER-X PRO in stereo 2-way operation with separate subwoofer signal (1) INPUT control.
SUPER-X PRO CX2310 User Manual (INPUT) (CLIP) (LOW CUT) (LOW/MID) (LOW OUTPUT) (INPUT) (CLIP) (LOW CUT) (LOW/HIGH) (LOW OUTPUT) (HIGH OUTPUT) (1) (2) (3) (MID/HIGH) (MID OUTPUT) (HIGH OUTPUT) (INPUT) (CLIP) (LOW CUT) (LOW/HIGH) (LOW OUTPUT) (HIGH OUTPUT) (4) (6) (5) (9) (8) (7) (14) (15) (17) (16) (7) (8) (10) (9) (13) (12) (11) Fig. 2.3: Active control elements on the front panel of the SUPER-X PRO in mono 3-way operation with separate subwoofer signal 2.
SUPER-X PRO CX2310 User Manual 3. Applications You will need some tools to help set up the SUPER-X PRO to its optimal configuration. To set up the crossover frequency you need to know which frequency range a loudspeaker stack covers, over which range the sound energy is linearly transmitted, and where reductions or increases in the frequency response occur. In addition, every room has different size and quality characteristics.
SUPER-X PRO CX2310 User Manual 4. Audio Connections As a standard, the BEHRINGER SUPER-X PRO CX2310 is equipped with electronically servo-balanced inputs and outputs. The circuit design features automatic hum suppression for balanced signals and so ensures trouble-free operation, even at the highest operating levels. Externally induced mains hum, etc. can therefore be effectively suppressed.
SUPER-X PRO CX2310 User Manual 5. Specifications Inputs Power Supply Connectors XLR Mains voltage Type Electronically servo-balanced, HF filtered USA/Canada 120 V~, 60 Hz Impedance balanced >50 kOhm, unbalanced >25 kOhm U.K./Australia 240 V~, 50 Hz Max.
We Hear You
