User Manual TRUTH B2031P/B2030P High-Resolution, Ultra-Linear Reference Studio Monitor
TRUTH B2031P/B2030P User Manual Table of Contents Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 Before you get started....................................................... 5 1.1.1 Online registration....................................
TRUTH B2031P/B2030P User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
TRUTH B2031P/B2030P User Manual “Support” at behringer.com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product.
TRUTH B2031P/B2030P User Manual 1. Introduction 2. Control Elements Congratulations! With our new BEHRINGER TRUTH you have purchased one of the best high-resolution passive studio monitors available. It is a tool that reproduces your program material with highest fidelity and balance, positioning sound sources accurately on the stereo basis. The control elements described in the following are the same on both speakers.
TRUTH B2031P/B2030P User Manual 3. Application 3.1.2 Amp The power rating of the amp you use should be roughly twice the load capacity of your TRUTH. Consequently, the B2030P should be operated with an amp with a load capacity of 2 x 200 Watts, and the B2031P with an amp with a load capacity of 2 x 300 Watts. 3.1 Connection Also, you should keep in mind the impedance of your TRUTH in order to guarantee optimal power delivery. The B2031P’s impedance is 4 Ω, whereas the B2030P’s is 8 Ω.
TRUTH B2031P/B2030P User Manual The BEHRINGER TRUTH B2030P/B2031P is a so-called near-field monitor, which means that the impact of the room acoustics on the sound will be reduced considerably owing to the short distance between speaker and listener. 3.3 Adapting the TRUTHs to the room acoustics To acoustically adapt your TRUTH to your control room, in cases when the speakers are located in unusual places or when you have specific sound requirements, you may have to use an external equalizer.
TRUTH B2031P/B2030P User Manual 4.
We Hear You
