U-CONTROL UMX49/UMX61 DATA-MANFULL_UMX49_ENG_Rev_A.pmd 1 User’s Manual Version 1.0 January 2006 12.01.
U-CONTROL UMX49/UMX61 IMPORTANT SAFETY PRECAUTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside; refer servicing to qualified personnel. Only qualified personnel may perform repairs.
U-CONTROL UMX49/UMX61 U-CONTROL The Ultimate Studio in a Box: 49-Key USB/MIDI Controller Keyboard with USB/Audio Interface, 50 Software Instruments and Ableton® Live Lite 4 BEHRINGER Edition UMX49 UMX61 V Unleash your creativity and play 50 virtual instruments and synthesizers, take off with an unlimited number of sound creations. Download more free instrument plug-ins and host software from www.behringer.
U-CONTROL UMX49/UMX61 TABLE OF CONTANTS VORWORT Dear Customer, welcome to the team of BEHRINGER users, and thank you very much for expressing your confidence in us by purchasing the U-CONTROL.
U-CONTROL UMX49/UMX61 1. INTRODUCTION Thank you for showing your confidence in BEHRINGER products by purchasing the UMX. The UMX is an extremely flexible master keyboard with a controller unit that can be used for a wide array of applications.
U-CONTROL UMX49/UMX61 Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information).
U-CONTROL UMX49/UMX61 2.2 USB mode and stand-alone operation The UMX can be operated as a USB interface or stand-alone device. The two modes are different with respect to the MIDI signal flow. 2.2.1 USB mode When the UMX is linked via USB to a computer, the signal flow is as shown below (fig. 2.1). VOLUME MUTE DEMO FILTER LEVEL PROG TYPE COMBI PLAY The PITCH BEND wheel is normally used to change the pitch in real time.
U-CONTROL UMX49/UMX61 Fig. 3.1: TOP view of the UMX 4. OPERATION We will explain the operation of the UMX in detail in the following. You must observe the following: There is a differentiation between push-buttons (refer to control elements ) and keys (control element )! Please do not confuse these! 4.1 THE PLAY MODE Fig. 3.2: Rear panel connectors Use this socket to supply the UMX with current from an external power supply unit (not included). The USB connector of the UMX.
U-CONTROL UMX49/UMX61 4.2.3 Assigning the GLOBAL CHANNELs: 4.2 THE ASSIGN MODE As already mentioned in previous chapters, the ASSIGN Mode is a powerful tool to optionally reconfigure the UMX into an ultracomfortable controller. 1) Press the ASSIGN push-button and hold it down. 2) Activate the control element for which the GLOBAL CHANNEL is to be set. If this is a controller or fader, briefly move the control element; when you have decided on a push-button, press this push-button once.
U-CONTROL UMX49/UMX61 4.2.7 Assignment of control elements We explained in chapter 4.2.2 how an individual channel can be assigned to each control element. You will now find out how to assign new controllers and a channel. Please note two exceptions in conjunction with the pushbuttons and/or the sustain pedal. a) The assignment for rotary controls R1 - R8, the MODULATION controller, the PITCH BEND wheel, as well as the DATA fader 1) Press the ASSIGN push-button and hold it down.
U-CONTROL UMX49/UMX61 The LSB part describes each of the 128 MSBs in another 128 individual stages. Both are individually numbered from 0 to 127. 2) Select the OCTAVE SHIFT push-button which you want to assign to the program change function. The enormous value range of a total of 128 x 128 = 16.384 different values is therefore available to you via the BANK SELECT command. This theoretically means that you could use external devices which support the same amount of different banks.
U-CONTROL UMX49/UMX61 b) Sequential scrolling in program libraries. 4.2.10 RANGE definitions Most sound producers have the option to store presets in a separate bank (frequently called a User Bank). If the sequence of songs to be played at a concert is defined by your band, you can store all of the sounds used for the gig in the User Bank in the sequence they occur in the concert and completely concentrate on your playing.
U-CONTROL UMX49/UMX61 5. SPECIFICATIONS USB connections Type Type B; USB1.
U-CONTROL UMX49/UMX61 6. APPENDIX Tab. 6.1: MIDI-Controller overview 14 DATA-MANFULL_UMX49_ENG_Rev_A.pmd 14 6. APPENDIX 12.01.
U-CONTROL UMX49/UMX61 7. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law. 2.
