U-CONTROL UMX49/UMX61 User’s Manual Version 1.
U-CONTROL UMX49/UMX61 IMPORTANT SAFETY PRECAUTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: WARNING: To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside; refer servicing to qualified personnel. Only qualified personnel may perform repairs. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth.
U-CONTROL UMX49/UMX61 FOREWORD TABLE OF CONTENTS Dear Customer, Welcome to the team of BEHRINGER users, and thank you very much for expressing your confidence in us by purchasing the U-CONTROL. 1. INTRODUCTION ......................................................... 4 Writing this foreword for you gives me great pleasure, because it represents the culmination of many months of hard work delivered by our engineering team to achieve a very ambitious goal.
U-CONTROL UMX49/UMX61 1. INTRODUCTION Thank you for showing your confidence in BEHRINGER products by purchasing the UMX. The UMX is an extremely flexible master keyboard with a controller unit that can be used for a wide array of applications.
U-CONTROL UMX49/UMX61 Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information).
U-CONTROL UMX49/UMX61 3. CONTROL ELEMENTS AND CONNECTIONS 2.2 USB mode and stand-alone operation The UMX can be operated as a USB interface or stand-alone device. The two modes are different with respect to the MIDI signal flow. 2.2.1 USB mode When the UMX is linked via USB to a computer, the signal flow is as shown below (Fig. 2.1). Sound-Modul VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY POWER The following factory settings refer to GLOBAL MIDI channel 1.
U-CONTROL UMX49/UMX61 Fig. 3.1: Top view of the UMX Keyboard legend: Informs you about the special functions performed by individual keys on the keyboard. The individual elements of the keyboard legend are described in detail in Chapter 4 “OPERATION”.
U-CONTROL UMX49/UMX61 4.2.3 GLOBAL CHANNEL assignment 4.2 ASSIGN mode As already mentioned in previous chapters, the ASSIGN Mode is a powerful tool to optionally reconfigure the UMX into an ultracomfortable controller. 1) Press the ASSIGN push-button and hold it down. 2) Activate the control element for which the GLOBAL CHANNEL is to be set. If this is a controller or fader, briefly move the control element; when you have decided on a push-button, press this push-button once.
U-CONTROL UMX49/UMX61 4.2.7 Control elements assignment We explained in Chapter 4.2.2 how an individual channel can be assigned to each control element. You will now find out how to assign new controllers and a channel. Please note two exceptions in conjunction with the pushbuttons and/or the sustain pedal. a) The assignment for rotary controls R1 – R8, the MODULATION controller, the PITCH BEND wheel, as well as the DATA fader 1) Press the ASSIGN push-button and hold it down.
U-CONTROL UMX49/UMX61 different values is therefore available to you via the BANK SELECT command. This theoretically means that you could use external devices which support the same amount of different banks. 4) Defined the channel by which the program change will be transmitted. Press one of the 16 channel keys through on the keyboard. 5) Press the key. Then press the number keys on the keyboard in sequence until you have completely entered the desired preset number.
U-CONTROL UMX49/UMX61 1) Press the ASSIGN push-button and hold it down. 4.2.10 Velocity Sensitivity The sensitivity of the UMX can be regulated so that the velocity of the keys has an effect on the volume level. 2) Press the 3) Release the ASSIGN push-button. 4) key. In order to discard your Finally, press the key or press the assignments, please press the ASSIGN push-button again. The ASSIGN LED will go off in all 3 cases. key.
U-CONTROL UMX49/UMX61 5. SPECIFICATIONS USB connections Type Type B; USB1.1 MIDI connections Type 5-pin DIN plug OUT CONTROL ELEMENTS Controller 1 control wheel with center reset 1 control wheel without center reset 8 rotary knobs 1 fader Buttons 12 buttons Keyboard UMX61 61 keys; velocity-sensitive UMX49 49 keys; velocity-sensitive SWITCH PLUG Foot pedal POWER SUPPLY USB Battery Power connector Power consumption UMX61 UMX49 1/4" mono jack with automatic polarity recognition 3 x 1.
U-CONTROL UMX49/UMX61 6. APPENDIX Tab. 6.1: MIDI-Controller overview 6.
U-CONTROL UMX49/UMX61 7. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract. 2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national warranty law.
