Quick Start Guide

(EN) Controls
ULM302MIC Controls
(1)
(3)
(2)
(1) POWER/STATUS LED will light
green when the microphone is
powered on. The LED will ash
when Mute mode is engaged,
and will turn o when the mic is
powered down. The LED will ash
red when the batteries are low and
need to be replaced.
(2) VOLUME UP/DOWN buttons
perform several functions:
• • Volume - Press the buttons
briey to turn the volume up
or down.
• • Mute – Hold the DOWN button
to mute the microphone, press
the UP button to unmute.
• • Power – Hold the UP button
to turn the microphone on.
While in Mute mode, hold the
DOWN button again to power
the mic o.
Note – if the microphone is left in Mute
mode for 10 minutes, the power will
automatically turn o.
(3) Changing the batteries – With
the microphone powered o,
unscrew the lower half of the
microphone body to expose the
battery slots. Observing correct
polarity, insert the new batteries
and replace the covering, then
turn the power on again.
(4) POWER LED lights when the unit
is powered on.
(5) AUDIO LEDs light whenever an
audio signal is received from
the associated microphone.
(6) Connection Meters display
the signal strength of the
wireless connection for
each channel.
(7) BATT(ery) LEDs light green to
indicate a healthy battery, and
light red when the batteries need
to be replaced. They will also light
red when their associated mic is
turned o.
(8) OUTPUTS send the audio signal
via balanced XLR or unbalanced
¼" TS cable.
(9) DC IN socket accepts the
connection of the included
power adapter.
(10) ON/OFF switch powers the unit
on and o.
(8)(8)
(4) (6)
(7)
(5)
(9) (10)
14 15Quick Start GuideULM302MIC